VECTOR NewYork 2500 Welding Machine AC/DC Puls TiG 200 MMA 5in1 + Magnet
Item number: K1055VW-EA3

VECTOR NewYork 2500 Welding Machine AC/DC Puls TiG 200 MMA 5in1 + Magnet

Item number: K1055VW-EA3
Available now!
745,44 $Old price: 776,50 $

including 19% VAT., no shipping costs to: DE,shipping (Standard)

(Net: 626,42 $)
Recommended retail price: 1.106,59 $
(You save 32.64%, that is 361,15 $)
AC/DC, TIG 200 A, Pulse, MMA/Stick, CUT
Produktdetails anzeigen

Newyork 2500


Light industrial Application:
Metal fabrication workshops
Shipyards and offshore industry
Maintenance and Repair
Pipe welding outside
Auto Body
Light Industry
Stick (MMA)
Plasma Cutting
Input Power: 230V, 1-Phase
Amperage Range: TIG/10-200A Stick/10-170A CUT/20-50A
Rated Output at40 C (104 F):
MMA:170A at 26.8V @ 25% Duty Cycle
TIG: 200A at 18V @ 40% Duty Cycle
CUT: 50A at 100V @ 40% Duty Cycle
Weight: 11,5KG
For TIG and Stick Welding
A total solution of precise AC/DC TIG PLUS welding and plasma cutting machine
Newyork 2500 built base on the Mastertig System offers precise, expert AC/DC TIG welding process. It?s a precise aluminum welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs.
Newyork 2500 also comes with a 50A@60 heavy duty cycle plasma cutting power source. What you need for any metal welding or cutting works, you just get this combo machine and it?s all you needs. For TIG and Stick Welding
Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It?s also very convenient to store or call out the welding parameters from the memory channels.
Specialist Features
Precision Arc Performance:
DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
Lift-Arc start provides AC or DC arc starting without the use of high frequency.
Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone
Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.
Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
Multiple Waveshapes:
Standard Squarewave for fast travel speeds and excellent puddle control, Sine wave for a traditional softer sounding arc,
Triangular wave to reduce the heat input into the weld at low amperage. Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action,
Pilot Arc for superior arc performance and easy start.
HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.
Continuous Output Control: focus the arc for different material thickness.
Rapid Arc Restrike: fast cutting through gaps, even expanded metal.
Powerful with heavy duty: 200A @50%.
10 channels memory capacity
Outstanding Quality:
Newly designed using the latest power electronic technology for improved reliability.
CE Certified.
2 Years Warranty on parts , 5 Years Warranty on Transformer
PowerSourceDimensionsL380mm x W160mm x H360mm
Nominal Supply Voltage230V+/-15%
Welding Current Range ( STICK Mode)10 - 170A
Welding Current Range ( TIG Mode)10 - 200A
Welding Current Range (CUT Mode)20 - 50A
Effective Input Current /STICK /TIG15.4A
Maximum Input Current/STICK/ TIG30.9A
Single Phase Generator Requirement10KVA
STICK (MMA) Welding Output, 40oC, 10 min.170A @ 25%, 26.8V
85A @ 100%, 23.4V
TIG (GTAW) Welding Output, 40oC, 10 min.200A @ 40%, 18V
126A @ 100%, 15V
CUTting Welding Output,40oC,10min.50A @ 40%, 100V
25A @ 100%, 90V
Open circuit voltage60V DC
Open circuit voltage CUT250V DC
Big cutting power in a small package - the
industry's most portable and powerful 40-amp
plasma cutter offers 10mm. mild steel cutting.
The unit offers easy connection to 115V or 230V
input with Auto-Line technology and MVP Adapters.
General View of Control Panel
Control Panel Parameter Values
1. Power ON Indicator
2. Pulse Button
3. Trigger Mode Control Button
4. Process Selection Button
5. Power ON Indicator
6. Thermal Overload Indicator
8.AC/DC Mode Button
9.Positive Control- Negative Control- Back Programming Button
10. Hot Start-Arcforce-Start time
General View of Contrl Panel(Continued)
1Gas Pre-FlowAbsolute setting range 0.1s to 20s (0.1S increments)
2Initial CurrentThe main current Setting range 10AMP to 100AMP
3Up SlopeSetting ranges :0.1S-10S (0.1S increments)
4Peak CurrentSetting ranges
10AMP to 200AMP (DC TIG mode), 10 to 200A (AC HF TIG mode)
5Base CurrentSetting ranges
10AMP to 200AMP (DC TIG mode), 10AMP to 200AMP (AC HF TIG mode)
6Pulse WidthSetting ranges 10%-90%
7PulseFrequencySetting ranges 1HZ -200HZ
8Down SlopeSetting ranges 0.1-10s
9End currentSetting ranges 10A-100A
10Post FlowSetting ranges 1-20S
11AC FrequencySetting ranges 50HZ-200HZ
12Wave BalanceSetting arranges 10%-50%
DC TIG-Pulse
High Speed DC TIG-Pulse Controls
PPS Pulses per second (Hz): DC=0.1- 5,000 PPS
% ON-% Peak Time: 5-95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
Background Amps: 5-99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and increase overall control of the weld puddleIIn excess of 40 PPS, Pulsed TIG becomes more audible than visible-causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds- between a high Peak and a low
Background amperage- can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds
(Common Range: 100-500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential-which is extremely beneficial to automation wheremaximum travel tspeeds are required.
Hot Start
Hot Start Function reliably ignites the electrode
and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes
lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
Arcforce correction (welding characteristics)
During the welding process, arcforce prevents
the electrode sticking in the weld pool with
increases in current. this makes it easier to weld
large-drop melting electrode types at low current
strengths with a short arc in particular.
For Standard accessories
TIG torch: WP-17
Gas connector: M16
Cable length4M
5-pin control coupler
Electrode holder
with cable 2,5M/200A
AG 60-Torch/4MEarth clamp with cable 2,5mReducing valve
For Optional accessories
Argon gas regularWater-cooling unit: wc-100
Operating Voltage:230V 50/60Hz
Rated Power:260W
Cooling Power:1.5KW(1L/MIN)
Tank Volume:6.5L

TIG torch: DGT 26
Cooling Method: Air-Cooled
Rating: DC 200A AC 125A
Duty Cycle: 35%
Electrode Size: 1.0-4.0

TrolleyFoot Pedal
5-pin aviation plug

Item numberK1055VW-EA3
Category TIG Weldingmachines
Welding Type: TIG DC
Plasma cutting: CUT contact
Brand: S-Series
Shipping weight:12,90 Kg
Product weight: 11,85 Kg
Dimensions ( length × width × height ): 59,00 × 46,00 × 41,00 cm
Ausgangsstrom WIG10-200 A
Ausgangsstrom MMA/ARC10-200 A
Ausgangsstrom Plasma/CUT10-45 A
Einschaltdauer WIG60% bei 200 A
Einschaltdauer MMA/ARC60% bei 200 A
Einschaltdauer Plasma/CUT60% bei 45 A
Leerlaufspannung56 V
Eingangsspannung230 V AC (+-15%) / 1 ~
Eingangsfrequenz50/60 Hz
Abzusichern mit min.16 A
Maximaler Eingangsstrom27 A
Maximale Eingangsleistung6,2 kVA
Empfohlene Generatorleistung> 7 kVA / 1 ~
Gewicht20,9 kg
Größe L x B x H mm ohne Griff500 x 330 x 320
Größe L x B x H mm mit Griff500 x 330 x 360
Netzstecker-TypSchuKo-Bauart CEE 7/7
NormenIEC 60 974-1 ; CE ;

Scope of delivery:

TIG accessories
TIG-Torch "WP-26" 4,5 Meter [Art.# SB2000-01]
4 Gas Nozzles. Size: 4 [Art.# ZT3010-01], 5 [Art.# ZT3010-04], 6 [Art.# ZT3010-07], 7 [Art.# ZT3010-10]
4 Collets. Größe 1,6 [Art.# ZT3000-04] and 2,4 [Art.# ZT3000-07]
4 Colletbodys. Größe 1,6 [Art.# ZT3001-04] and 2,4 [Art.# ZT3001-07]
One short [Art.# ZT3030-02] and one long [Art.# ZT3030-01] Tungsten head
CUT accessories
Plasma-Torch "AG-60" 4,50 Meter [Art.# SB2110-01]
5 Plasma Nozzles tip AG60 [Art.# ZC3110-01]
5 Plasmaelectrodes AG60 [Art.# ZC3111-01]
3 Shield cups AG60 [Art.# ZC3112-01]
* 1 set already assembled on torch
Watertrap with gauge [Art.# ZC3150]
Gas-Hose: 3 m [Art.# ZO3450]
Ground cable 3 Meter [Art.# CA2350-01]
Electrode cable for STICK 3 Meter [Art.# CA2300-01]


VectorBasic product catalogue



Warranty conditions

This product consists of

Related products