VECTOR Digital Welding machine AC/DC TIG V1841 Plus Inverter ALU TIG ARC MMA STICK Electrode

Item number: T1012VD


929,00 €

including 19% VAT., no shipping costs to: DE , shipping (Standard)

(Net: 780,67 €)
Recommended retail price: 1.099,00 €
(You save 15.47%, that is 170,00 €)

Available now!
Our Vector Digital welding machine device for challenging tasks. VECTOR Digital Welding machine AC/DC TIG V1841 Plus Inverter ALU TIG ARC MMA STICK Electrode AC/DC, TIG 180 A, TIG Puls, MMA/STICK 170 A, IGBT (Infineon)

Category: TIG Weldingmachines


pcs.

Description

ACDC PULSE TIG/V1841

Quick
specs

Light industrial Application:
Metal fabrication workshops
Shipyards and offshore industry
For These materials:
DC TIG (GTAW)
AC TIG (GTAW)
Input Power: 230V, 1-Phase
Amperage Range: 10-180A
Rated Output at40 C (104 F):
TIG: 180A at 17.2V @35% Duty Cycle
MMA: 170A at 26.8V @35% Duty Cycle
Weight: 10.6KG
 
For TIG and Stick Welding
  A total solution of precise AC/DC TIG welding machine  
AC/DC V1841 built base on the Mastertig System offers precise, expert AC/DC TIG welding process. It?s a precise aluminum welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs. Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It?s also very convenient to store or call out the welding parameters from the memory channels.
Specialist Features
  Precision Arc Performance:  
DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
Lift-Arc start provides AC or DC arc starting without the use of high frequency.
Adjustable AC output frequencyallows the operator to focus the arc minimizing the heat affected zone
Extended AC Balance Controlhelps maintain a pointed tungsten to direct the arc in the weld joint.
Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
Multiple Waveshapes:
Standard Squarewave for fast travel speeds and excellent puddle control,
Sine wave for a traditional softer sounding arc,
Triangular wave to reduce the heat input into the weld at low amperage.
Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action,
Pilot Arc for superior arc performance and easy start.
HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.
Continuous Output Control: focus the arc for different material thickness.
Rapid Arc Restrike: fast cutting through gaps, even expanded metal.
Powerful with heavy duty: 180A @35%.
10 channels memory capacity
 
  Outstanding Quality:  
 Newly designed using the latest power electronic technology for improved reliability.
 CE Certified.
 
  Technical specifications
 
  Description VECTOR DIGITAL O241 MULTIFUNCTION
  Power Source Mass 10.6 kg
  Power Source Dimensions H395mmxW180mmxD375mm
  Cooling Fan Cooled
  Welder Type Inverter Power Source
  European Standards EN 60974-1 / IEC 60974-1
  Number of Phases 1
  Nominal Supply Voltage 230V +/- 15%
  Nominal Supply Frequency 50/60Hz
Welding Current Range (DC STICK Mode) 10 - 170A
Welding Current Range (DC TIG Mode) 10 - 180A
Effective Input Current /STICK /TIG 21.5A/14.8A
Maximum Input Current/STICK/ TIG 30.4A/20.9A
Single Phase Generator Requirement 7.5KVA
STICK (MMA) Welding Output, 40oC, 10 min. 170A @ 35%, 26.8V / 100A @ 100%, 24V
TIG (GTAW) Welding Output, 40oC, 10 min. 180A @ 35%, 17.2V / 107A @ 100%, 14.3V
Open circuit voltage 70.0-80.0V DC
Protection Class IP23S
 
  General View of Control Panel
 
 
Control Panel Parameter Values
1. Digital Ammeter / Parameter meter
2. Power ON Indicator
3. Thermal Overload Indicator Light
4. Hot Start/Arcforce
5. JOB and SAVE

6. Mode Button
7. Trigger Mode Control Button (HF
TIG and LIFT TIG Mode only)
8. Process Selection Button
9. Pulse Button
10. Programming Parameter
Indicators
11. Positive Control
12. Negative Control
13. Selecting Function
 
  General View of Contrl Panel(Continued)
 
Item   Symbol   Description
1   Gas Pre-Flow   Absolute setting range 0.1s to 20s (0.1S increments)
2   Initial Current   The main current Setting range 10AMP to 100AMP
3   Up Slope   Setting ranges :0.1S-10S (0.1S increments)
4   Peak Current   Setting ranges
  10AMP to 200AMP (DC TIG mode), 10 to 200A (AC HF TIG mode)
5   Base Current   Setting ranges
  10-200AMP (DC TIG mode), 10-200AMP (AC HF TIG mode)
6   Pulse Width   Setting ranges 10%-90%
7   Pulse
  Frequency
  Setting ranges 1HZ -200HZ
8   Down Slope   Setting ranges 0.1-10s
9   End current   Setting ranges 10A-100A
10   Post Flow   Setting ranges 1-20S
11   AC Frequency   Setting ranges 50HZ-200HZ
12   Wave Balance   Setting arranges 10%-50%
 
  AC Waveshape Controls
AC Frequency control
Controls the width of the arc cone. Increasing the AC Frequency provides a more focused arc with increased directional control. Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld bead.
AC Balance Control
Controls arc cleaning action.
Adjusting the% EN of the AC wave controls the width of the etching zone surrounding the weld. Note: Set the AC Balance control for adequate arc cleaning action at the sides and in front of the
weld puddle. AC Balance should be fine tuned according to how heavy or thick the oxides are.
 
  DC TIG-Pulse
High Speed DC TIG-Pulse Controls
PPS Pulses per second (Hz): DC=0.1- 5,000 PPS
% ON-% Peak Time: 5-95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
Background Amps: 5-99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
CONVENTIONAL PULSED TIG HIGH SPEED PULSED TIG
Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and increase overall control of the weld puddle In excess of 40 PPS, Pulsed TIG becomes more audible than visible-causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds- between a high Peak and a low Background amperage can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds (Common Range: 100-500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential which is extremely
 
  Hot Start
Hot Start Function reliably ignites the electrode
and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes
lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
 
  Arcforce correction (welding characteristics)
 
During the welding process, arcforce prevents
the electrode sticking in the weld pool with
increases in current. this makes it easier to weld
large-drop melting electrode types at low current
strengths with a short arc in particular.
 
  Accessories
For Standard accessories   For Optional accessories
TIG torch: WP-26
Gas connector: M16
Cable length 3M
5-pin control coupler
     Argon gas regular Water-cooling unit: wc-100
Operating Voltage:230V 50/60Hz
Rated Power:260W
Cooling Power:1.5KW(1L/MIN)
Tank Volume:6.5L
Electrode holder with cable 3M/300A       parker
     TIG torch: WP-26
     Cooling Method: Air-Cooled
     Duty Cycle: 35%
     Electrode Size: 1.0-4.0
Foot Pedal
5-pin aviation plug
 
Earth clamp with cable 3M      Trolley  

Shipping weight: 17,00 Kg
Product weight: 14,00 Kg
Dimensions ( length × width × height ): 31,00 × 19,00 × 40,00 cm

Scope of delivery

Scope of delivery follows

pdf

Data sheet

Product catalogue

Warranty conditions

VECTOR DIGITAL manual