VECTOR Berlin2400 Kombi Welder DC TIG 200 Plus CUT TIG MMA E-Hand Inverter 4 in1
Item number: K1052SWIM

VECTOR Berlin2400 Kombi Welder DC TIG 200 Plus CUT TIG MMA E-Hand Inverter 4 in1

Item number: K1052SWIM
Available now!
466,92 €

including 16% VAT., no shipping costs to: DE,shipping (Standard)

(Net: 402,52 €)
Recommended retail price: 599,00 €
(You save 22.05%, that is 132,08 €)

VECTOR WELDING Schweißgerät mit Plasmaschneider Berlin 2400

DC WIG 10-200A

PULS Funktion

HF-Zündung

MMA/Elektrode 10-170A

Plasmaschneider 50A (Kontaktzündung)

IGBT

Jobspeicher

Hinweis: Kupplungsventil nicht im Lieferumfang enthalten

pcs.
Produktdetails anzeigen

Berlin 2400

Quick
specs

Light industrial Application:
Metal fabrication workshops
Shipyards and offshore industry
Maintenance and Repair
Pipe welding outside
Auto Body
Light Industry
Process:
DC TIG (GTAW)
Stick (SMAW)
Plasma Cutting
Input Power: 230V, 1-Phase
Amperage Range: TIG/10-200A Stick/10-170A CUT/20-50A
Rated Output at40 C (104 F):
MMA:170A at 26.8V @ 25% Duty Cycle
TIG: 200A at 18V @ 40% Duty Cycle
CUT: 50A at 196V @ 40% Duty Cycle
Weight: 9,5 KG
For TIG,Plasma and Stick Welding
A total solution of precise DC TIG welding and plasma cutting machine
Berlin 2400 is the ideal DC TIG welding and Air Plasma Cutting solution for installation, repair and maintenance applications.
Berlin 2400 is built on the base of the DIGITAL system, offers precise and efficient TIG welding process with full DC pulse TIG functions whatever you need.Accurate and refined HF ignition and the necessary control, power and work capacity to reliably complete a variety of professional welding tasks.
Berlin 2400 also comes with a 50A@60% heavy duty cycle plasma cutting power source. What you need for any metal welding or cutting works, you just get this combi machine and it?s all you needs.
Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC TIG welding with either HF or contact ignition. It?s also very convenient to store or take out the welding parameters from the memory .
Specialist Features
Precision Arc Performance:
 Pulse control:
Built in pulsing functions help to minimize heat input on thin materials, and provide for a faster freezing weld puddle for uphill welding on curved surfaces such as process piping. The TIG pulse also helps moderate filler metal deposition for consistent bead appearance.
 High-frequency TIG starting:
Makes it easy to establish an arc under a variety of conditions. Enhances quality by minimizing the potential for weld contamination created by tungsten inclusions in the weld.
Refined arc ignition from 5A (optional 3A).
Pilot Arc for superior arc performance and easy start.
HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.
Continuous Output Control: focus the arc for different material thickness.
Rapid Arc Restrike: fast cutting through gaps, even expanded metal.
Powerful with heavy duty: 50A @60%.
Hot Start Function reliably ignites the electrode and melts perfectly to ensure the best quality even at the start of the seam.
Arc Force makes it easier to weld large-drop melting electrode types at low current strengths with a short arc in particular.
Fast Spot Arc system simply controls the spot arc parameter and offers a stable arc.
4T Trigger Hold allows to hold the present current by user until press the trigger again.
Fast, precise, clean arc ignition and arc ending.
10 channels memory capacity
Outstanding Quality:
Newly designed using the latest power electronic technology for improved reliability.
CE Certified.
2 Year Warranty on parts , 5 Year Warranty on Transformer
Technicalspecifications
Description SIWM DIGITAL Berlin2400
Weight 9,5 kg
PowerSourceDimensions L380mm x W160mm x H405mm
Cooling FanCooled
WelderType InverterPowerSource
EuropeanStandards EN60974-1/IEC60974-1
NumberofPhases 1
Nominal Supply Voltage 230V+/-15%
NominalSupplyFrequency 50/60Hz
Welding Current Range ( STICK Mode) 10 - 170A
Welding Current Range ( TIG Mode) 10 - 200A
Welding Current Range (CUT Mode) 20 - 50A
Effective Input Current /STICK /TIG 15.4A
Maximum Input Current/STICK/ TIG 30.9A
Single Phase Generator Requirement 10KVA
STICK (MMA) Welding Output, 40 °C, 10 min. 170A @ 25%, 26,8V / 85A @ 100%, 23,4V
TIG (GTAW) Welding Output, 40 °C, 10 min. 200A @ 40%, 18V / 126A @ 100%, 15V
Plasma CuttingOutput,40 °C,10min. 50A @ 40%, 96V / 25A @ 100%, 90V
Open circuit voltage 73V DC / Plasma 265V DC
ProtectionClass IP23
GeneralViewofControlPanel
Control Panel Parameter Values
1. Power Indicator/Thermal Overload Indicator
2. Process Selection Button
3. Trigger Mode Control Button (HF
TIG and LIFT TIG Mode only)
4. Pulse Button
5. Negative Control/Positive Control
6. Digital Ammeter
7. Hot Start/ Arcforce Correction
8. JOB/SAVE
General View of Contrl Panel(Continued)
Item Symbol Description
1 Gas Pre-Flow Absolute setting range 0.1s to 20s (0.1S increments)
2 Initial Current The main current Setting range 10AMP to 100AMP
3 Up Slope Setting ranges :0.1S-10S (0.1S increments)
4 Peak Current Setting ranges
10AMP to 200AMP (DC TIG mode)
5 Base Current Setting ranges
10AMP to 200AMP (DC TIG mode)
6 Down Slope Setting ranges 0.1-10s
7 End current Setting ranges 10A-100A
8 Post Flow Setting ranges 1-20S
9 Remote Control The system independently identifies the remote control, and when the indicator light is on, the 9 welding current can be adjusted by remote (foot or welding gun).
10 Pulse Width Setting ranges 10%-90%
11 Pulse Frequency Setting ranges 1HZ -200HZ
DC TIG-Pulse
? High Speed DC TIG-Pulse Controls
? PPS Pulses per second (Hz): DC=0.1- 5,000 PPS
? % ON-% Peak Time: 5-95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
? Background Amps: 5-99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
CONVENTIONAL PULSED TIG HIGH SPEED PULSED TIG
Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and increase overall control of the weld puddle In excess of 40 PPS, Pulsed TIG becomes more audible than visible-causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds- between a high Peak and a low Background amperage can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds (Common Range: 100-500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential which is extremely
Hot Start
Hot Start Function reliably ignites the electrode
and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes
lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
Arcforce correction (welding characteristics)
During the welding process, arcforce prevents
the electrode sticking in the weld pool with
increases in current. this makes it easier to weld
large-drop melting electrode types at low current
strengths with a short arc in particular.
Accessories
For Standard accessories
TIG torch: WP-17
Gas connector: M16
Cable length 4M
5-pin control coupler
Electrode holder
with cable2,5m200A
PT31 Torch 4M
Earth clamp with cable 2,5M Reducing valve
AW2000
For Optional accessories
Argon gas regular Water-cooling unit: wc-100
Operating Voltage:230V 50/60Hz
Rated Power:260W
Cooling Power:1.5KW(1L/MIN)
Tank Volume:6.5L

TIG torch: DGT 26
Cooling Method: Air-Cooled
Rating: DC 200A AC 125A
Duty Cycle: 35%
Electrode Size: 1.0-4.0


Trolley Foot Pedal
Trolley:
5-pin aviation plug

BERLIN 2400 TECHNISCHE DETAILS:

Einstellbereich Schweißstrom (WIG  Modus)
10-200 A
EInstellbereich Schweißstrom (MMA/STICK Modus)
10 -170 A
Einstellbereich Schweißstrom (CUT Modus)
10 - 50 A
Einschaltdauer (ED) WIG 40°C
200 A bei 18 V 40%
Einschaltdauer (ED) MMA/STICK 40°C
170 A bei 26.8 V 25%
Einschaltdauer (ED) Plasmaschneider 40°C
50 A bei 96 V 40%
Netzspannung
1 x 230 Volt
Netzfrequenz
50 - 60 Hz
Schutzart
IP23
Maße in mm (L x B x H)
380 x 160 x 405
Gewicht in kg
9,5
Normen
EN60974-1 / EC60974-1
Maximale-Schnittkapazität (Hand geführt)
12 mm
Qualitäts-Schnittkapazität (Hand geführt)
8 mm

Berlin 2400 Lieferumfang:

DC WIG Schweißgerät und Plasmaschneider Berlin 2400
WIG-Brenner: WP-17 (9 Dorn, 5 pol), 4m
WIG- Set, 14-teilig
Plasma-Brenner: PT-31 (9 Dorn, 5 pol), 4m
Elektrodenzange (9 Dorn), 3m
Massezange mit Massekabel (9 Dorn), 3m
Wasserabscheider
Gasverbindungsschlauch

Manual Berlin 2400

English Manual Berlin 2400

Anleitung deutsch

Other customers have also bought the following items