WELDING EQUIPMENT AC/DC TIG 204 Pro
AC/ DC TIG 204 Pro offers precise,expert AC/DC TIG welding process.It is a precise welding specialist that fits allwelding materials (including aluminum) .
Easy operation and full functions: All necessary controls for DC,AC TIG welding (AC/DC) with HF or contact ignition(Lift Arc) can be quickly set via the control panel. TIG welding with 200Aand MMA/electrode welding also with200A.
TheTIG204 Pro welder has 9 memory channels, and welding parameters can be saved and reused on a new workpiece.
TIG 204 Pro PROPERTIES & ADVANTAGES:
- AC/DC TIG: Welding of all weldable metals including aluminum.
- The adjustable AC output frequency allowsthe operator to focus the arc, minimizing the heat affected zone.
- Advanced AC balance control helpsmaintain a pointed tungsten needle to precisely control the arc in the weld joint.
-
Lift-Arc-Start: Allows starting of AC or DC arc without high frequency.
-
Pulse function: in pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece.
- Continuous output control: focus thearc for different material thicknesses.Strong for heavy duty: 200A at 50% (TIG &MMA).
-
2 cycle/ 4 cycle
-
MMA/Electrodes/Stick: coatedElectrodes are used - in this process the electrodes are arc carrier and filler metal in one.
-
Hotstart: overcurrent is provided each time the welder is restarted, thus supporting the ignition of the arc.
- Arc-Force: molten material is more easily transferred to the workpiece, preventing the arc from being extinguished if this material causes contact between the electrode and the molten pool.
-
Anti-stick: automatically shuts down the welding generator when the electrode sticks to the workpiece and must be removed manually without damaging the electrode clamp.
- 9 memory locations for individual setting of welding parameters.
TIG 204 ProTECHNICAL DETAILS:
Setting rangeWelding current
| 10-200 A
|
Duty cycle (ED) TIG
| 200 A at 18V 50%
|
Duty cycle (ED) MMA
| 200 A at 28V 50%
|
Mains voltage
| 1 x 230 Volt
|
Mains frequency
| 50 - 60 Hz
|
Protection class
| IP23S
|
Dimensions in mm (L x W x H)
| 252 x 260 x 445 mm
|
Weight in kg
| 21,9
|
Standards
| EN 60974-1 / IEC 60974-1
|
Cooling
| Fan cooled
|
Welder type
| Inverter power source
|
