Set de maquina de soldadura MIG MAG 185A, MMA 160A, IGBT | MIG185A
Número de artículo: M2185B1

Set de maquina de soldadura MIG MAG 185A, MMA 160A, IGBT | MIG185A

Número de artículo: M2185B1
actualmente no disponible
419,00 €

incluido 19% IVA, Envío sin coste (Standard)

VECTOR WELDING MIG/MAG welding device MIG 185A

MIG/MAG 30-185A

2 cycle/ 4 cycle

MMA/electrode 30-160A

IGBT

suitable: wire coils 1kg (D100) & 5kg (D200)

COMPLETE SET including welding device, welding helmet, 2kg flux-cored wire and accessories

Mostrar detalles del producto
Welder Set MIG MAG 185A

Article number: M2185B

WELDER MIG 185A

The MIG 185A from Vector Welding is a MIG/MAG welder with 30-185A in MIG/MAG mode, 30-160A in MMA mode, and 10-180A in TIG mode (optional).

The MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.

This set is a full equipment consisting of MIG MAG welding device MIG 185A, welding helmet, 2kg welding wire (wire rolls), as well as a comprehensive accessory set (see scope of delivery)

MIG 185A PROPERTIES & ADVANTAGES:

  • MIG/MAG: Welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel.

  • Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range.
  • In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
  • inductivity: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and /-pr∧ /- precision is improved.

  • 2 cycle/4 cycle (MIG/MAG and TIG)

  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.

  • hot start: every time the welding machine is restarted, overcurrent is provided and thus supports the ignition of the arc.

  • Arc Force: Melted material is easier to removepasses more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.

  • Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be detached by hand without damaging the electrode clamp.

  • DC-TIG Welding (optional: only possible with additional hose package and cables): Welding of almost all metals

  • Lift Arc: The ignition etakes place on contact with the workpiece, then the torch can be lifted and the welding process starts with the selected parameters.

  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents

  • overheating protection

MIG 185A FEATURES:

MIGMAG 185A Funktionen

MIG 185A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)
30 - 185 A
setting range welding current (MMA/STICK mode)30 - 160 A
Adjustment range welding current (TIG mode)
10 - 180 A
Duty cycle (ED) MIG/MAG 40°C
185 A at 23V 40%
Duty cycle (ED) MMA/STICK 40°C
160 A at 26V 40%
Duty cycle (ED) TIG 40°C
180 A at 17.2V 40%
Mains voltage
1 x 230 Volt
Mains frequency
50 - 60 Hz
Protection class
IP23
Dimensions in mm (L x W x H)
391 x 153 x 282
Weight in kg
8
Standards
EN60974-1 / IEC60974-1
Systemsteuerung MIG 185A

1. On/Off
4. welding mode
7. 2 cycle/ 4 cycle
2. superheat indicator
5. display indicator display
8. wire thickness selection
3. parametervalign="top">3. parameter setting
6. ampere/inductance/burn-back/volt

MIG 185A TECHNICAL DETAILS:

setting range welding current (MIG/MAG  mode)
30 - 185 A
setting range welding current (MMA/STICK mode)
30 - 160 A
setting range welding current (TIG mode)
10 - 180 A
duty cycle (ED) MIG/MAG 40°C
185 A at 23V 40%
duty cycle (ED) MMA/STICK 40°C
160 A at 26V 40%
duty cycle (ED) TIG 40°C
180 A at 17, 2V 40%
mains voltage
1 x 230 Volt
mains frequency
50 - 60 Hz
Protection class
IP23
Dimensions in mm (L x W x H)
391 x 153 x 282
weight in kg
8
standards
EN60974- 1 / IEC60974-1

MIG 185 SET Scope of delivery:

MIG/MAG welding machine 185 MIG
MIG/MAG torch: MB-15 (Euro central connection), 3m
Automatic welding helmet
MIG/MAG accessories set (30 pieces) Gas nozzles and contact tips (0,8mm)
MIG/MAG cored wire steel ER70S 0,8mm - 1kg (D100 roll)
MIG/MAG cored wire NoGas E7T 0,8mm - 1kg (D100 roll)
electrode pliers (9 mandrel), 3m
ground clamp with ground cable (9 mandrel), 3m
gas connection hose

Información de contacto

Este artículo se compone de

Productos relacionados