Schweißgerät SET MIG MAG Schweißhelm, 5kg Fülldraht, Zubehör | MIG 295A
Item number: M2295B1

Schweißgerät SET MIG MAG Schweißhelm, 5kg Fülldraht, Zubehör | MIG 295A

Item number: M2295B1
Not available now!
719,00 €

including 16% VAT., no shipping costs to: DE,shipping (Standard)

Recommended retail price: 899,00 €
(You save 20.02%, that is 180,00 €)

VECTOR WELDING MIG/MAG welding device MIG 295A

MIG/MAG 30-295A

2 cycle/ 4 cycle

MMA/electrode 30-250A

IGBT

suitable: wire coils 5kg (D200) & 15kg (D300)

Produktdetails anzeigen
WELDING EQUIPMENT MIG MAG 295A

Article number: M2295B1

Welding device MIG 295A

The MIG 295A from Vector Welding is a MIG/MAG welding device with 30-295A in MIG/MAG mode, 30-250A in MMA mode, as well as 10-280A in TIG mode (optional).

The MIG/MAG welding process with its automatic wire feedis suitable for many welding applications, even when working in hard-to-reach places.

This set is a fully-equipped consisting of MIG MAG welding device MIG 295A, welding helmet in carbon-look, 5kg welding wire (wire roll), as well as an extensive accessory set (see scope of delivery)

MIG 295A PROPERTIES & ADVANTAGES:

  • MIG/MAG: welding with automatic wire feed. In MIG welding argon (rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for welding of non-ferrous metals and stainless steeland is mainly used for simple and low-alloy steel such as construction steel.

  • inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and precision is improved.

  • 2 cycles/4 cycles (MIG/MAG and TIG)

  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.

  • Hotstart: Each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.

  • Arc Force: Melted material is transferred to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.

  • Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clampto be damaged.

  • DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals

  • Lift Arc: The ignition takes place on contact with the workpiece, then the torch can be lifted and welding process starts with the selected parameters.

  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents

  • Overheating protection

MIG 295A FEATURES:

Mig Mag 295a Funktionen

MIG 295A TECHNICAL DETAILS:

Welding current setting range (MIG/MAG mode)
30 - 295 A
Welding current setting range (MMA/STICK mode)
30 - 2500 A
Welding current setting range (TIG mode)
10 - 280 A
Duty cycle (ED) MIG/MAG 40°C
295 A at 28.8V 60%
Duty cycle (E(ED) MMA/STICK 40°C
250 A at 30V 60%
Cycle time (ED) TIG 40°C
280 A at 21.2V 60%
Mains voltage
400 Volt/3 phases
Mains frequency
50 - 60 Hz
Protection class
IP23S
Dimensions in mm (L x W x H)
493 x 222 x 375
Weight in kg
13
Standards
EN60974-1 / IEC60974-1
Wire diameter in mm
0.6/0.8/1

MIG 295A CONTROLLER:

Control Panel MIG 225MIG 225A

1. on/off
4. welding mode
7. 2 cycle/ 4 cycle
2. superheat display
5. display display display
8. selection wire gauge
3. parameter setting
6. ampere/inductivity/burn-back/volt

MIG 295A TECHNICAL DETAILS:

setting range welding current (MIG/MAG  mode)
30 - 295 A
setting range welding current (MMA/STICK mode)
30 - 2500 A
setting range welding current (TIG mode)
10 - 280 A
duty cycle (ED) MIG/MAG 40°C
295 A at 28, 8V 60%
duty cycle (ED) MMA/STICK 40°C
250 A at 30V 60%
duty cycle (ED) TIG 40°C
280 A at 21, 2V 60%
mains voltage
400 Volt/3 phases
mains frequency
50 - 60 Hz
Protection class
IP23S
Dimensions in mm (L x W x H)
493 x 222 x 375
weight in kg
13
standards
EN60974- 1 / IEC60974-1
wire diameter in mm
0, 6/0.8/1

Welding Equipment SET MIG 295

MIG/MAG welding machine MIG 295
MIG/MAG torch: MB-15 (Euro central connection), 3m
Automatic welding helmet carbon-look
MIG/MAG accessories set (30 pieces) Gas nozzles and contact tips (0,8mm)
MIG/MAG cored wire steel (copper plated) ER70S 0,8mm - 5kg (D200 roll)
electrode pliers (9 mandrel), 3m
ground clamp with ground cable (9 mandrel), 3m
gas connection hose

Contact

This product consists of