SG-45 Plasma-Schweißbrenner 40A Eurozentral Adaptor

Artikelnummer: SB2112


139,90 €

inkl. 19% USt., versandfreie Lieferung innerhalb von DE , Versand (Standard)

(Netto: 117,56 €)
UVP des Herstellers: 159,90 €
(Sie sparen 12.51%, also 20,00 €)

knapper Lagerbestand
SG-45 Plasma-Schweißbrenner 40A Eurozentral Adaptor für C41 Plasmaschneider Geräte

Kategorie: CUT Plasma Brenner


Stk.

Beschreibung

  Non-HF Arc Ignition system
 
Vtorches with pilot arc cut in without high frequency
 
  Torch off.   By pressing the trigger
  the torch will be fed by
  the current thus causing
  a temporary short circuit
  betweenelectrode and tip.
  The air then pushes up the small piston,
  thuscreating, between the electrode and
  the tip, the distance needed to strike the
  pilot arc.
  By positioning the torch
  on the part to be cut,
  theplasma arc will strike.
 
Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and
computer systems in the vicinity of the cutting positions.
Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary
for striking the arc Greater simplicity in comparison with other torches(without high frequency) on the market, with a consequent
decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips,
nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without
endangering the safety parameters)
 

 Technical Dat :   SG-45

Cooling Metho:  Air-Cooled

Rating:               40A

Cutting Thickness: 8-12mm
 
Duty Cycle:   60%

Gas: Air/N

Gas Pressure : 4.5-5.0 bar  65-75 psi

Gas Flow :  100 l/min 210 scfh

 Pilot:  Electrode to Tip

Ignition : Back Striking  Without HF

Post Flow : 90 sec