item number:
M2145BS
WELDING DEVICE MIG 145A SET
The
light MIG 145A from Vector Welding is a cored wire
Welding machine that works without gas. It performs 30-145A in MIG mode,
30-140A in MMA mode and 10-140A in TIG mode (optional).
The device is easy to transport. The
Cored wire welding process with its automatic
Wire feed is suitable for many
Welding applications, also for working on difficult to
reaching places.
This article is a SET consisting of the MIG145A cored wire welding machine and 1kg NoGas wire
MIG
145A FEATURES & ADVANTAGES:
Cored wire welding with automatic Wire feed . No gas is used when welding with the MIG145A, the appropriate NoGas welding wire achieves convincing results together with this device.
Inductance: The device has Via a continuously adjustable throttle. These Smooths the welding current and changes it Current rate of rise so that the Weld seam quality and / precision is improved.
MMA / STICK / E-HAND: wrapped electrodes come too Use - in this process are the electrodes Arc beam and welding attachment in one.
Hotstart: every time the The welding machine is provided with overcurrent and thereby supports the ignition of the arc.
Arc Force: Melted Material is more easily transferred to the workpiece. Prevents going out of the arc when it makes contact through this material comes between the electrode and the weld pool.
Anti-Stick switches the welding generator automatically switches off when the electrode is on Workpiece sticks and has to be removed by hand without the Electrode clamp closed damage.
DC-TIG Welding ( optional : only with additional hose package and lines possible): Welding of almost all metals
Lift Arc: The ignition takes place on contact with the Workpiece, then the burner can be lifted and The welding process starts with the selected Parameters.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching electrical currents
Overheating protection
MIG
145A FEATURES:
MIG
145A TECHNICAL DETAILS:
| setting range
Welding current (MIG / MAG & nbsp; mode) | 30 - 145 A |
| setting range
Welding current (MMA / STICK mode) | 30 - 140 A |
| setting range
Welding current (TIG mode) | 10 - 140 A |
| duty cycle (ED) MIG / MAG 40 ° C | 145 A at 21 V 60% |
| duty cycle (ED) MMA / STICK 40 ° C | 140 A at 25.6V 60% |
| duty cycle (ED) TIG 40 ° C | 140 A at 15.6V 60% |
| Mains voltage | 1 x 230 volt |
| Grid frequency | 50 - 60 Hz |
| Degree of protection | IP23 |
| Dimensions in mm (L x W x H) | 290 x 125 x 250 |
| Weight in kg | 5.5 |
| Standards | EN60974-1 / IEC60974-1 |
| MIG/MAG welder 145 MIG |
| 1x wire roll 1kg (D100), 0.8mm NoGas |
| MIG/MAG torch: AK-14 (9 mandrel, 5 pole), 3m |
| Crocodile Electrode Holder (9 mandrel), 3m |
| Crocodile Earth Clamp with earth cable (9 mandrel), 3m |
Questo articolo è composto da
MIG MAG welding wire Cored wire E71T-GS | 0.8 / 1 kg / D100 roll | NoGas
