
article
number:
A2001B1
ARC 200K SET
The ARC 200K from VECTOR
WELDING is a 10-200A
electrode welding machine.
The handy format of
23,5x11x17,5cm with 2,5kg makes the device the perfect
companion for outdoor use.
Thanks to IGBT
the ARC 200K
has a high pulse load capacity and offers a precise and efficient electrode
welding process.
This article is a set consisting of an ARC200K electrode welding machine, high-quality gloves and ten stick electrodes. With this set you can start your project immediately - start welding now!
ARC 200K PROPERTIES & BENEFITS:
MMA/STICK/E-HAND: coated electrodes come into contact with Application - in this process the electrodes are Arc centre and welding additive in one
Hotstart: es is ignited with increased current, which The workpiece is heated sufficiently and thus a safe ignition guaranteed.
The arc force can be adjusted using ArcForce function. Melted material is transferred more easily to the workpiece. The extinction of the arc can be prevented by this adjustment
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching electrical power supply
-
Overheating protection
ARC 200K FEATURES:
ARC 200K TECHNICAL DETAILS:
adjustment range
Welding current (MMA/STICK mode) | 10 - 200 A |
duty cycle (ED) MMA/STICK
40°C | 200 A at 28V 20% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
protection class | IP23 |
Dimensions in mm | 235 x 110 x 175 |
weight in kg | 2.5 |
standards | EN60974-1 / IEC60974-1 |
ARC 200K TECHNICAL DETAILS:
adjustment range welding current (MMA/STICK mode) | 10 - 200 A |
duty cycle (ED) MMA/STICK 40°C | 200 A at 28V 20% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
protection class | IP23 |
dimensions in mm | 235 x 110 x 175 |
weight in kg | 2, 5 |
standards | EN60974-1 / IEC60974-1 |
ARC 200K Set Scope of delivery:
electrode welding unit ARC 200K |
electrode pliers (9 mandrel), 3m |
ground clamp with ground cable (9 mandrel), 3m |
1 pair of welding gloves |
10x rod electrode steel, E6013 |