PLASMA CUTTER 40D
The 40D from Vector Welding is a Plasma cutter with contact ignition. Its light weight of 6 kg makes it a handy and reliable partner in the areas of installation, repair, maintenance and DIY. The cutting current is infinitely adjustable from 20-40A. The 40D achieves a maximum cutting thickness of 13 mm and average quality cuts up to 10 mm.This set is a full equipment consisting of plasma cutter 40D, welding helmet, welding gloves, as well as an extensive accessory set (see scope of delivery).
40D
PROPERTIES & ADVANTAGES:
plasma cutter: A plasma beam generated by electricity melts the material and removes it with compressed air - a precise cut is produced. This process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminium, copper, etc.)
contact ignition: first-class ignition behaviour, when stroking over the workpiece the ignition occurs
cutting thickness steel: maximum 13mm (hand-guided). quality cut throughmaximum 13mm (hand-guided). quality cut on average up to 10mm (hand-guided).
cutting thickness aluminium: maximum 10mm (hand-guided). quality cut on average up to 7mm (hand-guided).
cutting current infinitely variable from 20-40A
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection
40D TECHNICAL DETAILS:
| setting range cutting current | 20 - 40 A |
| switch-on time (ED) Plasma cutter 40°C | 40A at 96V 30% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 375 x 152 x 291 |
| weight in kg | 6 |
| standards | EN60974- 1 / EC60974-1 |
| Maximum cutting capacity (manually guided) | 14 mm |
| Quality Cutting capacity (manually guided) | 8 mm |
40D SET Scope of delivery:
| 40D plasma cutter |
| plasma torch: PT-31 (9 mandrel, 5 pole), 4m with gas quick-acting closure |
| Automatic welding helmet |
| welding gloves |
| Plasma Accessories Set PT-31 (30 pieces) 10 gas nozzles, 10 stream nozzles, 5 swirl rings and 5 ceramic caps |
| gas connection hose |
| water separator |
| ground clamp with ground cable (9 mandrel), 3m |
This product consists of
Automatic welding helmet Wig Tig Mma Mig Mag welding mask | Flames design
Plasma cutter 40A, IGBT, contact ignition, cutting up to 13MM | 40D
