Plasma cutter 60A, IGBT, HF contact ignition, cutting up to 20MM, 400V | 60D
Item number: C2060B
Article
number: C2060B
PLASMA CUTTER 60D
The 60D from Vector Welding is a plasma cutter with contact ignition. Its light weight of 7 kg makes it a handy and reliable partner in the fields of installation, repair, maintenance and DIY.
The cutting current is infinitely variable from 20-60A. The
Plasma cutter convinces with its good cutting qualityand high cutting
speed. the 60D achieves a maximum cutting
thickness of 20mm and average quality cuts up to
14mm.
60D
PROPERTIES & ADVANTAGES:
- Plasma cutter: A plasma beam generated by electricity melts the material and removes it with compressed air – a precise cut is produced. this process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminium, copper, etc.)
-
contact
ignition: first-class ignition behaviour, when stroking
over the workpiece the ignition takes place
-
cutting
thickness steel: maximum up to 20mm (hand-guided). quality
cut average up to 14mm (hand-guided)
- cutting thickness aluminium: maximum up to 15mm (hand-guided). quality cut average up to 10mm (hand-guided)
- cutting current infinitely variable from 20-60A
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
- overheating protection
60D
FEATURES:
60D
TECHNICAL DETAILS:
| setting range cutting current | 20 - 60 A |
| switch-on time (ED) Plasma cutter
40°C | 60A at 104V 60% |
| mains voltage | 400 Volt |
| mains frequency | |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 425 x 152 x 291 |
| Weight in kg | 7 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity (hand
guided) | 20 mm |
| Quality cutting capacity (hand
gguided) | 14 mm |
60D TECHNICAL DETAILS:
| adjustment range cutting current | 20 - 60 A |
| switch-on time (ED) Plasma cutter 40°C | 60A at 104V 60% |
| mains voltage | 400 Volt/3 phases |
| mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 425 x 152 x 291 |
| weight in kg | 7 |
| standards | EN60974- 1 / EC60974-1 |
| Maximum cutting capacity (manually guided) | 20 mm |
| Quality Cutting capacity (manually guided) | 14 mm |
60D Scope of delivery:
| 60D plasma cutter |
| plasma torch: AG-60 (9 mandrel, 5 pole), 4,5m with gas quick-acting closure |
| gas connection hose |
| water separator |
| ground clamp with ground cable (9 mandrel), 3m |
