Plasma cutter 50A, IGBT, contact ignition, cutting up to 18MM | Paris 500
Codice articolo: C1053SIWM
article
number: C1053SIWM
PLASMA CUTTER PARIS 500
The Paris 500 from Vector Welding is a plasma cutter with contact ignition. Its light weight of 7 kg makes it a handy and reliable partner in the fields of installation, repair, maintenance and DIY.
The cutting current isinfinitely variable from 20-50A. The
plasma cutter convinces with a good cutting quality and high cutting
speed. The Paris 500 achieves a maximum cutting
thickness of 18 mm and average quality cuts up to 12mm.
Paris
500 PROPERTIES & ADVANTAGES:
- plasma cutter: A plasma beam generated by electricity melts the material and removes it with compressed air – a precise cut is produced. With this process all conductive metals can be cut (e.g. steel, stainless steel, aluminium, Copper, etc.)
- contact ignition: first-class ignition
behavior, when stroking over the workpiece the ignition takes place
- cutting thickness steel: maximum up to 18mm (hand-guided). quality cut 14mm (hand-guided)
-
cutting
thickness aluminium: maximum up to 12mm
(hand-guided). quality cut 8mm (hand-guided)
-
cutting current
infinitely variable from 20-50A
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
- overheat
protection
Paris
500 FEATURES:
Paris
500 TECHNICAL DETAILS:
| setting range cutting current | 20 - 50 A |
| duration of operation (ED) plasma
cutter 40°C | 50A at 100V 30% |
| mains voltage | 1x230V |
| Network frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 380 x 160 x 320 |
| Weight in kg | 7 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity (manually
guided) | 18 mm |
| quality cutting capacity
(hand-guided) | 14 mm |
Paris 500 TECHNISCHE DETAILS:
| Einstellbereich Schneidstrom | 20 - 50 A |
| Einschaltdauer (ED) Plasmaschneider 40°C | 50A bei 100V 30% |
| Netzspannung | 1x230V |
| Netzfrequenz | 50 - 60 Hz |
| Schutzart | IP23 |
| Maße in mm (L x B x H) | 380 x 160 x 320 |
| Gewicht in kg | 7 |
| Normen | EN60974-1 / EC60974-1 |
| Maximale-Schnittkapazität (Hand geführt) | 18 mm |
| Qualitäts-Schnittkapazität (Hand geführt) | 14 mm |
Paris 500 Lieferumfang:
| Plasmaschneider Paris 500 |
| Plasma-Brenner: PT-31 (9 Dorn, 2 pol), 4m |
| Massezange mit Massekabel (9 Dorn), 3m |
| Wasserabscheider |
| Gasverbindungsschlauch |
