Plasma cutter 40A, IGBT, contact ignition, cutting up to 13MM | 40D
Item number: C2040B
Item number:
C2040B
PLASMA CUTTER 40D
The 40D from Vector Welding is a plasma cutter with contact ignition. Its light weight of 6 kg makes it a handy and reliable partner for installation, repair, maintenance and DIY.
The cutting current is continuously adjustable from 20-40A.
The 40D achieves a maximum cutting thickness of 13
mm and average Quality cuts up to 10 mm.
40D
PROPERTIES & ADVANTAGES:
- Plasma cutter: A plasma beam generated by electricity melts the material and removes it with compressed air – a precise cut is produced. This process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminium, copper, etc.)
- contact ignition:
first-class ignition behaviour, when stroking over the workpiece the
ignition occurs
- cutting thickness steel: maximum 13mm (hand-guided). quality cut on average up to 10mm (hand-guided).
- cutting thickness aluminium: maximum 10mm (hand-guided). quality cut on average up to 7mm (hand-guided).
- cutting
current infinitely variable from 20-40A
- modern IGBT
(Insulated Gate Bipolar Transistor) enables fast and therefore low-loss
switching of electrical currents
- overheating
protection
40D
FEATURES:
40D
TECHNICAL DETAILS:
| adjustment range cutting current | 20 - 40 A |
| duration of operation (ED) plasma
cutter 40°C | 40A at 96V 30% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23S |
| dimensions in mm (L x W x H) | 375 x 152 x 291 |
| Weight in kg | 6 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity (manually
guided) | 13 mm |
| Quality cutting capacity (manually
guided) | 10 mm |
40D TECHNICAL DETAILS:
| adjustment range cutting current | 20 - 40 A |
| switch-on time (ED) Plasma cutter 40°C | 40A at 96V 30% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 375 x 152 x 291 |
| weight in kg | 6 |
| standards | EN60974- 1 / EC60974-1 |
| Maximum cutting capacity (manually guided) | 14 mm |
| Quality Cutting capacity (manually guided) | 8 mm |
40D Scope of delivery:
| 40D plasma cutter |
| plasma torch: PT-31 (9 mandrel, 5 pole), 4m with gas quick-acting closure |
| gas connection hose |
| water separator |
| ground clamp with ground cable (9 mandrel), 3m |
