Plasma cutter 100A, IGBT, high frequency ignition (HF pilot), cutting 24MM, 400V | 100PD
Item number: C2100B
Item number:
C2100B
PLASMA CUTTER 100PD
The
100PD from Vector Welding is a plasma cutter with contactless HF
ignition. The machine is a strong and reliable partner in the fields of
installation, repair, maintenance and DIY.
The cutting current is continuously adjustable from 20-100A. The 100PD
achieves a maximum cutting thickness of 40mm and average quality cuts
up to 25mm.
100PD
FEATURES & ADVANTAGES:
- Plasma cutter: A plasma jet generated by electricity melts the material and removes it with compressed air - a precise cut is produced. All conductive metals can be cut with this process (e.g. steel, stainless steel, aluminium, copper, etc.)
- High-frequency ignition, contactless: first-class ignition behaviour without the need for contact with the workpiece
- Cutting thickness steel: maximum 40mm (hand guided). Quality cut average up to 25mm (hand-guided).
- Cutting thickness aluminium: maximum 25mm (hand-guided). Average quality cut up to 20mm (hand-guided).
- Cutting current continuously adjustable from 20-100A
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
- Overheating
protection
100PD
FEATURES:
100PD
TECHNICAL DETAILS:
| setting range cutting current | 20 - 100 A |
| Duty cycle (ED) Plasma cutter
40°C | 100A at 120V 60% |
| mains voltage | 400V/3 phases |
| mains frequency | 50 - 60 Hz |
| protection class | IP23S |
| dimensions in mm (L x W x H) | 594 x 225 x 348 |
| weight in kg | 14 |
| standards | EN60974-1 / EC60974-1 |
| maximum cutting capacity
(hand-guided) | 40 mm |
| Quality-Slicing capacity (hand-guided) | 25 mm |
100PD TECHNICAL DETAILS:
| setting range cutting current | 20 - 100 A |
| switch-on time (ED) Plasma cutter 40°C | 100A at 120V 60% |
| mains voltage | 400V/3 phases |
| mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 594 x 225 x 348 |
| weight in kg | 14 |
| standards | EN60974- 1 / EC60974-1 |
| Maximum cutting capacity (manually guided) | 40 mm |
| Quality Cutting capacity (manually guided) | 25 mm |
100PD Scope of delivery:
| plasma cutter 100PD |
| plasma torch(9 mandrel, 2 pole), PILOT, 4m |
| ground clamp with ground cable (9 mandrel), 3m |
| water separator |
