
Article
number:
M1055VD
MIG/MAG
WELDER R231
The R231
from Vector Welding is a MIG/MAG
Welding range with 25-200A in MIG/MAG mode,
30-170A in MMA mode, and 10-200A in TIG mode (optional)
the
MIG/MAG welding process with its automatic
Wire feeding is suitable for many
welding applications, even when working on difficult to
to the places you reach.
R231
PROPERTIES & BENEFITS:
- MIG/MAG: welding with automatic Wire feed. With MIG welding the Argon (more rarely helium) is used as a protective gas, this process is called preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as protective gas and is used mainly for simple and low-alloy steel is used like mild steel.
-
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. Here amperes are coupled to volts.
- In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
-
Inductance: The device has
a continuously adjustable choke. This
smoothes the welding current and changes the
rate of current rise, so that the
Weld seam quality and / or precision
is improved.
- 2
Clock/4 clock (MIG/MAG and TIG)
- MMA/STICK/E-HAND: coated electrodes come into contact with Application - in this process the electrodes are Arc centre and welding additive in one
-
Hotstart: at every restart of the
Welding space is provided for overcurrent
and thereby supports the ignition of the arc.
-
Arc Force: Melted
Material is transferred more easily to the workpiece.
Prevents the extinction
of the arc, if this material causes contact
between electrode and molten bath.
- Anti-Stick switches the welding generator automatically when the electrode is Workpiece and must be removed by hand, without the Electrode terminal to beschädigen.
- DC-TIG welding (optional: only with additional hose package and cables (possible): welding of almost all metals
- Lift Arc: The ignition occurs on contact with the the workpiece, then the burner can be lifted and Welding process starts with the selected Parameters.
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching electrical power supply
- 9 Storage space
R231
FEATURES:
R231
TECHNICAL DETAILS:
adjustment range
Welding current (MIG/MAG mode) | 25 - 200 A |
adjustment range
Welding current (MMA/STICK mode) | 30 - 170 A |
adjustment range
Welding current (TIG mode) | 10 - 200 A |
duty cycle (ED) MIG/MAG
40°C | 200 A at 24V 40% |
duty cycle (ED) MMA/STICK
40°C | 170 A at 26.8V 40% |
switch-on time (ED) TIG 40°C | 200 A at 18V 40% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
protection class | IP23S |
dimensions in mm (L x W x H) | 490 x 225 x 380 |
weight in kg | 16,2 |
standards | EN60974-1 / IEC60974-1 |
wire diameter in mm | 0.6/0.8/1 |
R231
SYSTEM CONTROL:

1. On/Off | 5. display Volt | 8. "-" key |
2. Overheating indicator | 5. display Volt | 9. welding mode (MIG/MAG,
TIG, MMA) |
3. JOB and SAVE | 6. parameter setting | 10. 2 cycle/ 4 cycle |
4. display Ampere | 7. "+" key | 11. choice of wire material |
R231
TECHNICAL DETAILS:
setting range welding current (MIG/MAG mode) | 25 - 200 A |
setting range welding current
(MMA/STICK mode) | 30 - 170 A |
setting range welding current
(TIG mode) | 10 - 200 A |
duty cycle (ED) MIG/MAG
40°C | 200 A at 24V 40% |
duty cycle (ED) MMA/STICK
40°C | 170 A at 26,8V 40% |
duty cycle (ED) TIG 40°C | 200 A at 18V 40% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
protection class | IP23S |
dimensions in mm (L x W x H) | 490 x 225 x 380 |
weigh in kg | 16,2 |
standards | EN60974-1 / IEC60974-1 |
wire diameter in mm | 0,6/0,8/1 |
wire roll | D300, maximum 15kg |
R231 Scope of delivery:
MIG/MAG welding unit R231 |
MIG/MAG torch: MB-15 Euro central connection, 3m |
electrode pliers 200A (13 mandrel), 3m |
ground clamp with ground cable (13 mandrel), 3m |
gas connection hose |