
Article
number: M1052VD
MIG/MAG
WELDING EQUIPMENT R221
The R221
from Vector Welding is a MIG/MAG welding equipment
with 25-200A in MIG/MAG mode and 30-170A in MMA mode.
The
MIG/MAG welding process with its automatic wire feed
is suitable formany welding applications, even when working in
hard-to-reach areas.
R221
PROPERTIES & ADVANTAGES:
- MIG/MAG: welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals as well as stainless steel. the MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steelSteel used like mild steel.
-
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
- In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
-
Inductance: The device has a continuously adjustable choke.
This smoothes the welding current and changes the rate at which the
current rises so that the weld seam quality and precision is improved.
- 2
cycles/4 cycles (MIG/MAG and TIG)
-
MMA/STICK/E-HAND: coated electrodes are used - in this
process the electrodes are arc carrier and filler metal in one.
-
hot start: at every Neach time the welding unit is restarted,
overcurrent is provided to support the ignition of the arc.
-
Arc Force: Melted material transfers more easily to the
workpiece. Prevents the arc from going out if this material causes
contact between the electrode and the molten pool.
- Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
- modern IGBT (Insulated Gate BipBipolar transistor) allows fast and therefore low-loss switching of electrical currents
-
9 memory locations
- overheating protection
R221
FEATURES:
R221
TECHNICAL DETAILS:
setting range welding current
(MIG/MAG mode) | 25 - 200 A |
setting range welding current
(MMA/STICK mode) | 30 - 170 A |
switch-on time (ED) MIG/MAG
40°C | 200 A at 24V 40% |
Duty cycle
(ED) MMA/STICK 40°C | 170 A at 26.8V 40% |
Mains voltage | 1 x 230 Volt |
Mains frequency | 50 - 60 Hz |
Protection class | IP23S |
Dimensions in mm (L x W x H) | 490 x 225 x 380 |
Weight in kg | 15.9 |
Standards | EN60974-1 / IEC60974-1 |
Wire diameter in mm | 0.6/0.8/1 |
R221
CONTROLLER:

1. on/off | 5. display display volt | 9. welding mode (MIG/MAG, MMA) |
2. superheat display | 6. parameter setting | 10. 2 cycle/ 4 cycle |
3. JOB and STORE | 7. "+" key | 11. wire thickness |
4. display ampere | 8. "-" key |
|
R221
TECHNICAL DETAILS:
setting range welding current
(MIG/MAG mode) | 25 - 200 A |
setting range welding current
(MMA/STICK mode) | 30 - 170 A |
switch-on time (ED) MIG/MAG
40°C | 200 A at 24V 40% |
Duty cycle
(ED) MMA/STICK 40°C | 170 A at 26.8V 40% |
Mains voltage | 1 x 230 Volt |
Mains frequency | 50 - 60 Hz |
Protection class | IP23S |
Dimensions in mm (L x W x H) | 490 x 225 x 380 |
Weight in kg | 15.9 |
Standards | EN60974-1 / IEC60974-1 |
Wire diameter in mm | 0.6/0.8/1 |
R221 Scope of delivery:
MIG/MAG welding unit R221 |
MIG/MAG torch: MB-15 Euro central connection, 3m |
electrode pliers 200A (13 mandrel), 3m |
ground clamp with ground cable (13 mandrel), 3m |
gas connection hose |