MIG MAG welder 200A, MMA electrode 170A, IGBT, for 5kg wire reel | Milano 2300
Codice articolo: M1057SWIM

MIG MAG welder 200A, MMA electrode 170A, IGBT, for 5kg wire reel | Milano 2300

Codice articolo: M1057SWIM
attualmente non disponibile
549,00 €

compr. 19% IVA, Consegna senza spese di spedizione Entro DE,Spedizione (Standard)

UVP dal produttore: 719,00 €
(Lei risparmia 23.64%, ovvero 170,00 €)

VECTOR WELDING MIG/MAG welding device Milano 2300

MIG/MAG 10-200A

2 cycle/4 cycle

MMA/electrode 10-170A

IGBT Inverter

Job memory

suitable: wire roll 5kg (D200)

welding device MIG MAG Milano 300

Article number: M1057SIWM


The lightweight Milano 2300 from Vector Welding is a MIG/MAG welding machine with 10-200A in MIG/MAG mode, 10-170A in MMA mode, as well as 10-200A in TIG mode (optional).

The MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.


  • MIG/MAG: Welding with automatic wire feed. When MIG welding argon (more rarely helium) is used as the shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as the shielding gas and is mainly used for simple and low-alloy steel such as mild steel.
  • Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
  • In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
  • Inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise to improve the weld seam quality and precision.
  • 2 cycles/4 cycles (MIG/MAG and TIG)
  • MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are the arc carrier and filler metal in a.
  • hot start: each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
  • Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
  • Anti-Stick automatically switches off the welding generator if the electrode is not in contact with the molten poolElectrode is stuck to the workpiece and must be removed by hand without damaging the electrode clamp.
  • DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
  • Lift Arc: Ignition occurs on contact with the workpiece, then the torch can be lifted and the welding process starts with the selected parameters.span>
  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical SCurrents
  • Job memory: With the help of memory locations, workflows can be saved and used again at a later time.
  • overheating protection




Welding current setting range (MIG/MAG mode)
10 - 200 A
Welding current setting range (MMA/STICK mode)
10 - 170 A
Welding current setting range (TIG mode)
10 - 200 A
Welding current duty cycle (ED) MIG/MAG 40°C
200 A at 18V 40%
Duty cycle (ED) MMA/STICK 40°C
170 A at 26.8V 30%
Duty cycle (ED) TIG 40°C
200 A at 18V 40%
Mains voltage
1 x 230 Volt
Mains frequency
50 - 60 Hz
Protection class
Dimensions in mm (L x W x H)
490 xx 225 x 380
weight in kg
EN60974-1 / IEC60974-1
wire diameter in mm


Control Panel MIG MAGMIG MAG Milano 2300

1. on/off
4. display Ampere
7. welding mode (MIG/MAG, TIG, MMA)
2. superheat display
5. display Volt
8. 2 cycle/ 4 cycle
3. JOB and SAVE
6. parameter setting
9. selection wire gaugeSelection wire thickness


Einstellbereich Schweißstrom (MIG/MAG  Modus) SPL
30 - 200 A
Einstellbereich Schweißstrom (MIG/MAG  Modus) 0,6 Draht
25-110 A
Einstellbereich Schweißstrom (MIG/MAG  Modus) 0,8 Draht
35-180 A
Einstellbereich Schweißstrom (MIG/MAG  Modus) 1 Draht
50-200 A
Einstellbereich Schweißstrom (MMA/STICK Modus)
10 - 170 A
Einstellbereich Schweißstrom (WIG Modus)
10 - 200 A
Einschaltdauer (ED) MIG/MAG 40°C
200 A bei 18V 40%
Einschaltdauer (ED) MMA/STICK 40°C
170 A bei 26,8V 30%
Einschaltdauer (ED) WIG 40°C
200 A bei 18V 40%
1 x 230 Volt
50 - 60 Hz
Maße in mm (L x B x H)
490 x 225 x 380
Gewicht in kg
EN60974-1 / IEC60974-1
Drahtdurchmesser in mm

Milano 2300 Lieferumfang:

MIG/MAG Schweißgerät Milano 2300
MIG/MAG-Brenner: MB-15 (Eurozentralanschluss), 3m
Elektrodenzange (9 Dorn), 3m
Massezange mit Massekabel (9 Dorn), 3m

Dati sui recapiti

Bedienungsanleitung Milano 2300

English Manual Milano 2300

I clienti hanno acquistato anche i seguenti prodotti