MIG MAG welder 185A, MMA electrode 160A, IGBT, for 1kg wire reel | MIG185A
Codice articolo: M2185B

MIG MAG welder 185A, MMA electrode 160A, IGBT, for 1kg wire reel | MIG185A

Codice articolo: M2185B
disponibilità immediata

Tempo di consegna: 2 - 3 giorni lavorativi

359,00 €

compr. 19% IVA, Consegna senza spese di spedizione Entro DE,Spedizione (Standard)

UVP dal produttore: 469,00 €
(Lei risparmia 23.45%, ovvero 110,00 €)

VECTOR WELDING MIG/MAG welding device MIG 185A

MIG/MAG 30-185A

2 cycle/ 4 cycle

MMA/electrode 30-160A



suitable: wire rolls 1kg (D100) & 5kg (D200)

welding device MIG MAG 185A

Article number: M2185B


The MIG 185A from Vector Welding is a MIG/MAG welding devicewith 30-185A in MIG/MAG mode, 30-160A in MMA mode, as well as 10-180A in TIG mode (optional).

The MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.


  • b>MIG/MAG: Welding with automatic wire feed. In MIG welding argon (selenium, lead, copper) is used as shielding gas Argon (more rarely helium) is used as the shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as the shielding gas and is mainly used for simple and low-alloy steel such as mild steel.

  • Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
  • In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
  • Inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate at which the current rises to improve the quality and precision of the weld seam.

  • 2 cycle/4 cycleCycle (MIG/MAG and TIG)

  • MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are the arc carrier and filler metal in one.

  • Hotstart: each time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.

  • Arc Force: Melted material is transferred more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the workpieceElectrode and molten pool is coming.

  • Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.

  • DC-TIG welding (optional: only possible with additional hose package and cables): Welding of almost all metals

  • Lift Arc: Ignition occurs when the electrode is in contact with the workpiece, then the torch can be lifted and welding starts with the selected parameters.

  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents

  • overheating protection


MIGMAG 185A Function; width: 100%


setting range welding current (MIG/MAG mode)
30 - 185 A
setting range welding current (MMA/STICK mode)
30 - 160 A
Adjustment range welding current (TIG mode)
10 - 180 A
Duty cycle (ED) MIG/MAG 40°C
185 A at 23V 40%
Duty cycle (ED) MMA/STICK 40°C
160 A at 26V 40%
Duty cycle (ED) TIG 40°C
180 A at 17.2V 40%
Mains voltage
1 x 230 Volt
Mains frequency
50 - 60 Hz
Protection class
Dimensions in mm (L x W x H)
391 x 153 x 282
Weight in kg
EN60974-1 / IEC60974-1

1. on/off
4. welding mode
7. 2 cycle/ 4 cycle
2. superheat display
5. display display display
8. selection wire thickness
3. parameter setting
6. ampere/inductance/burn-back/volt


Einstellbereich Schweißstrom (MIG/MAG  Modus)
30 - 185 A
Einstellbereich Schweißstrom (MMA/STICK Modus)
30 - 160 A
Einstellbereich Schweißstrom (WIG Modus)
10 - 180 A
Einschaltdauer (ED) MIG/MAG 40°C
185 A bei 23V 40%
Einschaltdauer (ED) MMA/STICK 40°C
160 A bei 26V 40%
Einschaltdauer (ED) WIG 40°C
180 A bei 17,2V 40%
1 x 230 Volt
50 - 60 Hz
Maße in mm (L x B x H)
391 x 153 x 282
Gewicht in kg
EN60974-1 / IEC60974-1

MIG 185 Lieferumfang:

MIG/MAG Schweißgerät 185 MIG
MIG/MAG-Brenner: MB-15 (Eurozentralanschluss), 3m
Elektrodenzange (9 Dorn), 3m
Massezange mit Massekabel (9 Dorn), 3m

I clienti hanno acquistato anche i seguenti prodotti