MIG MAG welder 160A, MMA electrode 140A, IGBT, for 5kg wire reel | Milano 1600

MILANO 1600 PROPERTIES & ADVANTAGES:

• MIG/MAG: Welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 oris based on CO2 or a mixed gas of argon, CO2 and O2 as a shielding gas and is mainly used for simple and low-alloy steel such as mild steel.

• Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
  
• In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
  

• Inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate at which the current rises so that the weld seam quality and precision is improved.
  

• 2 cycles/4 cycles (MIG/MAG and TIG)
  

• MMA/STICK/E-HAND: coated electrodes are used - forare used - in this process the electrodes, arc carrier and filler metal are in one.
  

• hot start: each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
  

• Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
  

• Anti-Stick switches the welding process off and the arc is switched on againWelding generator automatically switches off if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.

• DC-TIG Welding (optional: only possible with additional hose package and cables): Welding of almost all metals

• Lift Arc: The ignition is triggered when the electrode is in contact with the workpiece, then the torch can be lifted and welding starts with the selected parameters.

• modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents

• Job memory: With the help of memory locations, workflows can be saved and used again at a later time.
  

• overheating protection

MILANO 1600 FEATURES:

MILANO 1600 TECHNICAL DETAILS: