MIG MAG welder 160A, MMA electrode 140A, IGBT, for 5kg wire reel | Milano 1600
Item number: M1058SWIM

MIG MAG welder 160A, MMA electrode 140A, IGBT, for 5kg wire reel | Milano 1600

Item number: M1058SWIM
Available now!

Shipping time: 2 - 3 workdays

447,43 €

including 16% VAT., no shipping costs to: DE,shipping (Standard)

Recommended retail price: 549,00 €
(You save 18.5%, that is 101,57 €)

VECTOR WELDING MIG/MAG welding device Milano 1600

MIG/MAG 10-160A

2 cycle/4 cycle

MMA/electrode 10-140A

IGBT Inverter

Job memory

suitable: wire roll 5kg (D200)

Note: clutch valve and wire roll not included in delivery

 
pcs.
Produktdetails anzeigen
Welding device MIG MAG Milano 1600

article number: M1058SIWM

WELDING DEVICES MILANO 1600

The light Milano 1600 from Vector Welding is a MIG/MAG welding device with 10-160A in MIG/MAG mode, 10-140A in MMA mode, as well as 10-160A in TIG mode (optional).

The MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.

MILANO 1600 PROPERTIES & ADVANTAGES:

  • MIG/MAG: Welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 oris based on CO2 or a mixed gas of argon, CO2 and O2 as a shielding gas and is mainly used for simple and low-alloy steel such as mild steel.

  • Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. Here amperes are coupled to volts, the wire feed speed can be set separately.

  • In SPL Mode, amps, volts and wire feed speed can be set independently. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.

  • Inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate at which the current rises so that the weld seam quality and precision is improved.

  • 2 cycles/4 cycles (MIG/MAG and TIG)

  • MMA/STICK/E-HAND: coated electrodes are used - forare used - in this process the electrodes, arc carrier and filler metal are in one.

  • hot start: each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.

  • Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.

  • Anti-Stick switches the welding process off and the arc is switched on againWelding generator automatically switches off if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.

  • DC-TIG Welding (optional: only possible with additional hose package and cables): Welding of almost all metals

  • Lift Arc: The ignition is triggered when the electrode is in contact with the workpiece, then the torch can be lifted and welding starts with the selected parameters.

  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents

  • Job memory: With the help of memory locations, workflows can be saved and used again at a later time.
  • overheating protection

MILANO 1600 FEATURES:

Mig Mag Milano 1600 Funktionen

MILANO 1600 TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)
10 - 160 A
setting range welding current (MMA/STICK mode)
10 - 140 A
Adjustment range welding current (TIG mode)
10 - 160 A
Duty cycle (ED) MIG/MAG 40°C
160 A at 22V 40%
Duty cycle (ED) MMA/STICK 40°C
140 A at 25.6V 40%
Duty cycle (ED) TIG 40°C
160 A at 16.4V 40%
Mains voltage
1 x 230 Volt
Network frequency
50 - 60 Hz
Protection class
IP23
Dimensions in mm (L x W x H)
490 x 225 x 380
Weight in kg
14
Standards
EN60974-1 / IEC60974-1
Wire diameter in mm
0.6/0.8/1

MILANO 1600 CONTROLLER CONTROL:

Control panel MIG MAG Milano 1600

1. on/off
4. display Ampere 7. welding mode (MIG/MAG, TIG, MMA)
2. superheat display
5. display display volt
8. 2 cycle/ 4 cycle
3. JOB and SAVE
6. parameter setting
9. selection wire thickness

MILANO 1600 TECHNICAL DETAILS:

setting range welding current (MIG/MAG  mode)
10 - 160 A
setting range welding current (MMA/STICK mode)
10 - 140 A
setting range welding current (TIG mode)
10 - 160 A
duty cycle (ED) MIG/MAG 40°C
160 A at 22V 40%
duty cycle (ED) MMA/STICK 40°C
140 A at 25, 6V 40%
duty cycle (ED) TIG 40°C
160 A at 16, 4V 40%
mains voltage
1 x 230 Volt
mains frequency
50 - 60 Hz
Protection class
IP23
Dimensions in mm (L x W x H)
490 x 225 x 380
weight in kg
14
standards
EN60974- 1 / IEC60974-1
wire diameter in mm
0, 6/0.8/1

Milano 1600 Scope of delivery:

MIG/MAG welding machine Milano 1600
MIG/MAG torch: MB-15 (Euro central connection), 3m
electrode pliers (9 mandrel), 3m
ground clamp with ground cable (9 mandrel), 3m
gas connection hose

Manual Milano 1600

English Manual Milano 1600

Others