
Article
number: M2145B
WELDING EQUIPMENT MIG 145A
The
lightweight MIG 145A from Vector Welding is a MIG/MAG
welding equipment with 30-145A in MIG/MAG mode, 30-140A in
MMA mode, as well as 10-140A in TIG mode (optional).
The
lightweight equipment is easy to transportThe MIG/MAG welding process
with its automatic wire feed is suitable for many
welding applications, also for work in hard-to-reach areas.
MIG
145A PROPERTIES & ADVANTAGES:
MIG/MAG: Welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals as well as stainless steel. The MAG process uses CO2 or a MMixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as structural steel
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. Here amperes are coupled to volts, the wire feed speed can be set separately.
In SPL Mode, amps, volts and wire feed speed can be set independently. This is a great advantage when an individual setting is required.
inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and precision is improved.
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
hot start: every time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
anti-stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without the electrode clamp zto be damaged.
DC TIG welding (optional: only possible with additional hose package and cables): Welding of almost all metals
Lift Arc: The ignition takes place on contact with the workpiece, then the torch can be lifted and welding process starts with the selected parameters.>span>
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switchingSwitching electrical currents
overheating protection
MIG
145A FEATURES:
MIG
145A TECHNICAL DETAILS:
Welding current setting range
(MIG/MAG mode) | 30 - 145 A |
Welding current setting range
(MMA/STICK mode) | 30 - 140 A |
Welding current setting range (TIG
mode) | 10 - 140 A |
Welding current duty cycle (ED)
MIG/MAG 40°C | 145 A at 21 V 60% |
duration of operation (ED)
MMA/STICK 40°C | 140 A at 25.6V 60% |
duration of operation (ED) TIG
40°C | 140 A at 15.6V 60% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
protection class | IP23 |
Dimensions in mm (L x W x H) | 290 x 125 x 250 |
Weight in kg | 5.5 |
Standards | EN60974-1 / IEC60974-1 |
MIG 145A TECHNICAL DETAILS:
setting range welding current (MIG/MAG mode) | 30 - 145 A |
setting range welding current (MMA/STICK mode) | 30 - 140 A |
setting range welding current (TIG mode) | 10 - 140 A |
duty cycle (ED) MIG/MAG 40°C | 145 A at 21 V 60% |
duty cycle (ED) MMA/STICK 40°C | 140 A at 25, 6V 60% |
duty cycle (ED) TIG 40°C | 140 A at 15, 6V 60% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
protection class | IP23 |
Dimensions in mm (L x W x H) | 290 x 125 x 250 |
weight in kg | 5, 5 |
standards | EN60974-1 / IEC60974-1 |
MIG 145 Scope of delivery:
MIG/MAG welding machine 145 MIG |
MIG/MAG torch: AK-14 (9 mandrel, 5 pole), 3m |
electrode pliers (9 mandrel), 3m |
ground clamp with ground cable (9 mandrel), 3m |