London 2400 Profi Kombi Wig Schweigert AC/DC WIG 200 Puls ALU TIG MMA E-Hand Inverter 4 in1 + Magnet klein

London 2400 Profi Kombi Wig Schweigert AC/DC WIG 200 Puls ALU TIG MMA E-Hand Inverter 4 in1 + Magnet klein

Item number: T1054SWIM-SET8


581,00 €

including19% VAT. , no shipping costs to: DE , shipping (Standard)

(Net: 488,24 €)
Recommended retail price: 699,00 €
(You save 16.88%, that is 118,00 €)

Available now!
Digitales Profi-Schweigert mit Job-Speicher:
- Gleich / Wechselstrom WIG Schweien,
- AC - Aluminium Schweien,
- WIG Puls-Funktion - Impulsschweien,
- MMA /ARC-Elektroden-Handschweien,
- Dnnblech + ALU geeignet

Category: AC/DC TIG

London 2400

Quick
specs

Light industrial Application:
Metal fabrication workshops
Shipyards and offshore industry
For These materials:
DC TIG (GTAW)
AC TIG (GTAW)
STICK (MMA)
Input Power: 230V, 1-Phase
Amperage Range: 10-200A
Rated Output at40 C (104 F):
TIG: 200A at 18V @50% Duty Cycle
MMA: 200A at 28V @50% Duty Cycle
Weight: 11KG
For TIG and Stick Welding
A total solution of precise AC/DC TIG welding machine
AC/DC London2400 is built on the base of the digital system, which offers precise, expert AC/DC TIG welding process. It?s a precise welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs. Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It?s also very convenient to store or call out the welding parameters from the memory channels by pressing the Job and Save button.
Specialist Features
Precision Arc Performance:
DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
Lift-Arc start provides AC or DC arc starting without the use of high frequency. Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone.
Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.
Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
Multiple Waveshapes:
Standard Squarewave for fast travel speeds and excellent puddle control, Sine wave for a traditional softer sounding arc,
Triangular wave to reduce the heat input into the weld at low amperage.
Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action,
Pilot Arc for superior arc performance and easy start.
HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.
Continuous Output Control: focus the arc for different material thickness. Powerful with heavy duty: 200A @50%.
10 channels memory capacity
Outstanding Quality:
Newly designed using the latest power electronic technology for improved reliability.
CE Certified.
2 Jahre Garantie auf Teile, 5 Jahre Garantie auf Transformator
Technical specifications
Description SIWM DIGITAL London2400
Weight 11 kg
Power Source Dimensions H525mmxW260mmxD445mm
Cooling Fan Cooled
Welder Type Inverter Power Source
European Standards EN 60974-1 / IEC 60974-1
Number of Phases 1
Nominal Supply Voltage 230V +/- 15%
Nominal Supply Frequency 50/60Hz
Welding Current Range (DC STICK Mode) 10 - 170A
Welding Current Range (DC TIG Mode) 10 - 200A
Effective Input Current /STICK /TIG 15.4A
Maximum Input Current/STICK/ TIG 30.9A
Single Phase Generator Requirement 10KVA
STICK (MMA) Welding Output, 40oC, 10 min. 170A @ 50%, 26.8V / 85A @ 100%, 23.4V
TIG (GTAW) Welding Output, 40oC, 10 min. 200A @ 40%, 18V / 126A @ 100%, 15V
Open circuit voltage 60V DC
Protection Class IP23
General View of Control Panel
Control Panel Parameter Values
1. Power ON Indicator
2. Pulse Button
3. Trigger Mode Control Button
4. Process Selection Button
5. Power ON Indicator
6. Thermal Overload Indicator
7JOB and SAVE
8.AC/DC Mode Button
9.Positive Control- Negative Control- Back Programming Button
10. Hot Start-Arcforce-Start time
General View of Contrl Panel(Continued)
Item Symbol Description
1 Gas Pre-Flow Absolute setting range 0.1s to 20s (0.1S increments)
2 Initial Current The main current Setting range 10-200AMP
3 Up Slope Setting ranges :0.1S-10S (0.1S increments)
4 Peak Current Setting ranges
10-200AMP (DC TIG mode), 10 -200A (AC HF TIG mode),10-200A(STICK mode)
5 Base Current Setting ranges
10-200AMP (DC TIG mode), 10-200AMP (AC HF TIG mode)
6 Pulse Width Setting ranges 10%-90%
7 Pulse
Frequency
Setting ranges 1HZ -200HZ
8 Down Slope Setting ranges 0.1-10s
9 End current Setting ranges 10A-100A
10 Post Flow Setting ranges 1-20S
11 AC Frequency Setting ranges 50HZ-200HZ
12 Wave Balance Setting arranges 10%-50%
AC Waveshape Controls
AC Frequency control
Controls the width of the arc cone. Increasing the AC Frequency provides a more focused arc with increased directional control. Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld bead.
AC Balance Control
Controls arc cleaning action.
Adjusting the% EN of the AC wave controls the width of the etching zone surrounding the weld. Note: Set the AC Balance control for adequate arc cleaning action at the sides and in front of the
weld puddle. AC Balance should be fine tuned according to how heavy or thick the oxides are.
DC TIG-Pulse
High Speed DC TIG-Pulse Controls
PPS Pulses per second (Hz): DC=0.1- 5,000 PPS
% ON-% Peak Time: 5-95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
Background Amps: 5-99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
CONVENTIONAL PULSED TIG HIGH SPEED PULSED TIG
Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and increase overall control of the weld puddle In excess of 40 PPS, Pulsed TIG becomes more audible than visible-causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds- between a high Peak and a low Background amperage can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds (Common Range: 100-500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential which is extremely
Hot Start
Hot Start Function reliably ignites the electrode
and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes
lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
Arcforce correction (welding characteristics)
During the welding process, arcforce prevents
the electrode sticking in the weld pool with
increases in current. this makes it easier to weld
large-drop melting electrode types at low current
strengths with a short arc in particular.
Accessories
For Standard accessories For Optional accessories
TIG torch: WP-17
Gas connector: M16
Cable length 4M
5-pin control coupler
Argon gas regular Water-cooling unit: wc-100
Operating Voltage:230V 50/60Hz
Rated Power:260W
Cooling Power:1.5KW(1L/MIN)
Tank Volume:6.5L
Electrode holder with cable 2,5M 200A parker
TIG torch: WP-26
Cooling Method: Air-Cooled
Duty Cycle: 35%
Electrode Size: 1.0-4.0
Foot Pedal
5-pin aviation plug
Earth clamp with cable 2,5M Trolley


Shipping weight: 12,40 Kg
Product weight: 11,35 Kg
Dimensions ( length width height ): 38,00 16,00 36,00 cm

Manual London 2400

English Manual London 2400

This product consists of

Related products