Item number:
A1082VW
ELECTRODE WELDING UNIT E201
The E201 from VECTOR WELDING is a 20-200A electrode welder.
The E201
has a hot start function. The work piece is heated up sufficiently and
thus a safe ignition is guaranteed. The arc force can be
adjusted with the ArcForce function.
Thanks to IGBT,
the E201 has a high
pulse load capacity and offers a precise and efficient
electrode welding process.
E201
FEATURES & BENEFITS:
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hotstart: every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc Force: Melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and the molten pool.
Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
Overheating protection
E201
FEATURES:
E201
TECHNICAL DETAILS:
| adjustment range
Welding current (MMA/STICK mode) | 10 -200 A |
| duty cycle (ED) MMA/STICK
40°C | 1200 A at 28V 30% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23 |
| dimensions in mm (L x W x H) | 390 x 180 x 390 |
| weight in kg | 10 |
| standards | EN60974-1 / IEC60974-1 |
E201
SYSTEM CONTROL:
| 1. On/Off | 3. indicator display | 5. "+" key |
| 2., Overheating indicator | 4. parameter settings | 6. "-" key |
E201 TECHNICAL DETAILS:
| adjustment range welding current (MMA/STICK mode) | 10 - 200 A |
| duty cycle (ED) MMA/STICK 40°C | 1200 A at 28V 30% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 390 x 180 x 390 |
| weight in kg | 10 |
| standards | EN60974- 1 / IEC60974-1 |
| electrode welding unit E201 |
| electrode pliers 200A (13 mandrel), 3m |
| ground clamp with ground cable (13 mandrel), 3m |
