Item number:
A1068VD
Electrode Welder E161
The E161
from Vector Welding is an electrode welding machine with 20-160A.
The device E161 has a hotstart
function. Here the ignition is done with increased current, the
workpiece is heated up sufficiently and thus a safe ignition is
guaranteed. The arc force can be adjusted with the help of ArcForce.
Thanks to IGBT, the E161 has
a high pulse load capacity and offers a precise and efficient electrode
welding process.
E161
PROPERTIES & BENEFITS:
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are Arc carrier and filler metal in one.
hotstart: for every time the welding machine is restarted overcurrent and thus the ignition of the arc supported.
Arc Force: Melted Material transfers more easily to the workpiece. Prevents the arc from being extinguished when it is material comes into contact between the electrode and the molten bath.
Anti-Stick switches automatically switches off the welding generator when the electrode is workpiece is stuck and can be removed by hand without damaging the electrode clamp.
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection
E161
FEATURES:
E161
TECHNICAL DETAILS:
| adjustment range welding current
(MMA/STICK mode) | 20 - 160 A |
| duty cycle (ED) MMA/STICK
40°C | 160 A at 26V 40% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23 |
| Dimensions in mm (L x W x H) | 390 x 180 x 390 |
| weight in kg | 9, 6 |
| standards | EN60974-1 / IEC60974-1 |
E161
CONTROLLER:
| 1. On/Off | 3. display display | 5. "+" key |
| 2. superheat display | 4. parameter settings | 6. "-" key |
E161 TECHNICAL DETAILS:
| adjustment range welding current (MMA/STICK mode) | 10 - 160 A |
| duty cycle (ED) MMA/STICK 40°C | 160 A at 26V 40% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23 |
| Dimensions in mm (L x W x H) | 390 x 180 x 390 |
| weight in kg | 9, 6 |
| standards | EN60974-1 / IEC60974-1 |
E161 Scope of delivery:
| electrode welder E161 |
| electrode pliers 200A (13 mandrel), 3m |
| ground clamp with ground cable (13 mandrel), 3m |
