DC TIG welder 170A with plasma cutter 40A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | O241
Codice articolo: T1042VD
article number: T1024VD
WELDER + PLASMA-CUTTER O241
The O241 from Vector Welding is the ideal DC TIG welder/ and plasma cutting solution for installation, repair, maintenance and DIY.
The strong O241 is based on the DIGITAL system and offers a precise and efficient TIG welding process with full DC-pulse TIG functions for every requirement. Welding with 170A in TIG and MMA (electrode) mode.
Plasma
cutting with up to 16mm, quality cuts up to 10mm
(hand-guided).
O241
PROPERTIES & ADVANTAGES:
-
3in1 combi device: DC TIG, MMA/STICK,
plasma cutting
- DC TIG welding: welding of almost all
metals
-
HF-ignition (TIG)
-
pulse function: in pulse welding the
welding current alternates between output and peak current at the
desired frequency. the longer the intervals, the less energy and heat
is supplied to the workpiece
- MMA/STICK/E-HAND: coated electrodes
are used - in this process the electrodes are the arc carrier and
filler metal in one.
-
hot start: each time the welding unit
is restarted, overcurrent is provided and thus supports the ignition of
the arc.
-
Arc Force: melted material passes more
easily to the workpiece. prevents the arc from being extinguished if
this material causes contact between the electrode and the molten pool.
-
anti-stick automatically switches off
the welding generator if the electrode sticks to the workpiece and has
to be removed by hand without damaging the electrode clamp.
-
plasma cutter: CUT function using a
plasma jet generated by electricity. this melts the material and
removes it with compressed air – a precise cut is produced.
this process can be used to cut all conductive metals (e.g. steel,
stainless steel, aluminium, etc.)Aluminium, copper, etc.)
- contact ignition (CUT)
-
cutting thickness: maximum 16mm
(hand-guided), quality cut 10mm (hand-guided)
- modern IGBT (Insulated Gate Bipolar
Transistor) enables fast and therefore low-loss switching of electrical
currents
- overheating protection
- 10 memory locations for individual
setting of welding parameters.
O241
FEATURES:
O241
TECHNICAL DETAILS:
| setting range welding current (TIG
& STICK mode) | 10-170 A |
| setting range welding current (CUT
mode(CUT mode) | 10 - 40 A |
| Duty cycle (ED) TIG 40°C | 200 A at 18 V 40% |
| Duty cycle (ED) MMA/STICK
40°C | 170 A at 26.8 V 60% |
| Duty cycle (ED) Plasma cutter
40°C | 40 A at 96 V 60% |
| Mains voltage | 1 x 230 Volt |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23 S |
| Dimensions in mm (L x W x H) | 390 x 150 x 300 |
| Weight in kg | 15 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity | 16 mm |
| Quality cutting capacity | 10 mm |
O241
CONTROL PANEL:
| 1. display | 7. frequency/Hz display | 13. mode: MMA/WIG/Plasma |
| 2. ampere display | 8. settings welding parameters | 14. PULSE function |
| 3. percent | 9. hotstart/ ARC force | 15. "-" key |
| 4. power on indicator | 10. JOB | 16. "+" key |
| 5. superheat indicator | 11. SAVE | 17. parameter settings |
| 6. seconds | 12. 2 stroke / 4 stroke |
| 1. gas flow | 5. pulse current | 9. remote (remote control) |
| 2. start current | 6. current reduction | 10. pulse width |
| 3. current rise | 7. final current | 11. pulse frequency |
| 4. welding current | ||
| 8. gas wake-up |
|
O241 TECHNISCHE DETAILS:
| Einstellbereich Schweißstrom (WIG & STICK Modus) | 10-180 A |
| Einstellbereich Schweißstrom (CUT Modus) | 10 - 40 A |
| Einschaltdauer (ED) WIG 40°C | 200 A bei 18 V 40% |
| Einschaltdauer (ED) MMA/STICK 40°C | 170 A bei 26.8 V 60% |
| Einschaltdauer (ED) Plasmaschneider 40°C | 40 A bei 96 V 60% |
| Netzspannung | 1 x 230 Volt |
| Netzfrequenz | 50 - 60 Hz |
| Schutzart | IP23 S |
| Maße in mm (L x B x H) | 390 x 150 x 300 |
| Gewicht in kg | 15 |
| Normen | EN60974-1 / EC60974-1 |
| Maximale-Schnittkapazität | 16 mm |
| Qualitäts-Schnittkapazität | 10 mm |
O241 Lieferumfang:
| DC WIG Schweißgerät & Plasmaschneider O241 |
| WIG-Brenner: WP-26 (9 Dorn, 5 pol), 4m |
| WIG-Set, 14-teilig |
| Plasma-Brenner: AG-60 (9 Dorn, 5 pol.), Gasschnellerschluss, 6m |
| Plasma-Set |
| Elektrodenzange 200A (9 Dorn), 3m |
| Massezange mit Massekabel (9 Dorn), 3m |
| Gasverbindungsschlauch |
| Wasserabscheider |
