DC TIG welder 170A with plasma cutter 40A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | O241
Item number: T1042VD

DC TIG welder 170A with plasma cutter 40A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | O241

Item number: T1042VD
Short supply

Shipping time: 2 - 3 workdays

599,40 €

including 19% VAT., no shipping costs (Standard)

Recommended retail price: 1.299,00 €
(You save 53.86%, that is 699,60 €)

VECTOR WELDING DC TIG welding unit with Plasma cutter O241

DC TIG 10-170A

PULSE Function

HF ignition

MMA/electrode 10-170A

Plasma cutter 40A (contact ignition)

IGBT

job memory

pcs.
Produktdetails anzeigen
Welder and plasma cutter DC TIG O241

article number: T1024VD

WELDER + PLASMA-CUTTER O241

The O241 from Vector Welding is the ideal DC TIG welder/ and plasma cutting solution for installation, repair, maintenance and DIY.

The strong O241 is based on the DIGITAL system and offers a precise and efficient TIG welding process with full DC-pulse TIG functions for every requirement. Welding with 170A in TIG and MMA (electrode) mode.

Plasma cutting with up to 16mm, quality cuts up to 10mm (hand-guided).

O241 PROPERTIES & ADVANTAGES:

  • 3in1 combi device: DC TIG, MMA/STICK, plasma cutting
  • DC TIG welding: welding of almost all metals
  • HF-ignition (TIG)
  • pulse function: in pulse welding the welding current alternates between output and peak current at the desired frequency. the longer the intervals, the less energy and heat is supplied to the workpiece
  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.
  • hot start: each time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
  • Arc Force: melted material passes more easily to the workpiece. prevents the arc from being extinguished if this material causes contact between the electrode and the molten pool.
  • anti-stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
  • Plasma cutter: CUT function using a plasma jet generated by electricity. this melts the material and removes it with compressed air – a precise cut is produced. this process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminium, etc.)Aluminium, copper, etc.)
  • contact ignition (CUT)
  • cutting thickness: maximum 16mm (hand-guided), quality cut 10mm (hand-guided)
  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
  • overheating protection
  • 9 memory locations for individual setting of welding parameters.

O241 FEATURES:

Gerätefunktionen

O241 TECHNICAL DETAILS:

setting range welding current (TIG & STICK mode)
10-170 A
setting range welding current (CUT mode(CUT mode)
10 - 40 A
Duty cycle (ED) TIG 40°C
170 A at 16,8 V 60%
Duty cycle (ED) MMA/STICK 40°C
170 A at 26.8 V 60%
Duty cycle (ED) Plasma cutter 40°C
40 A at 96 V 60%
Mains voltage
1 x 230 Volt
Mains frequency
50 - 60 Hz
Protection class
IP23 S
Dimensions in mm (L x W x H)
390 x 150 x 300
Weight in kg
15
Standards
EN60974-1 / EC60974-1
Maximum cutting capacity
16 mm
Quality cutting capacity
10 mm

O241 CONTROL PANEL:

O241 Control Panel

1. display
7. frequency/Hz display
13. mode: MMA/WIG/Plasma
2. ampere display
8. settings welding parameters
14. PULSE function
3. percent
9. hotstart/ ARC force
15. "-" key
4. power on indicator
10. JOB
16. "+" key
5. superheat indicator
11. SAVE 17. parameter settings
6. seconds
12. 2 stroke / 4 stroke

O241 Setting details
1. gas flow
5. pulse current
9. remote (remote control)
2. start current
6. current reduction
10. pulse width
3. current rise
7. final current
11. pulse frequency
4. welding current
8. gas wake-up


O241 TECHNICAL DETAILS:

setting range welding current (TIG & STICK mode)
10-180 A
setting range welding current (CUT mode(CUT mode)
10 - 40 A
Duty cycle (ED) TIG 40°C
200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C
170 A at 26.8 V 60%
Duty cycle (ED) Plasma cutter 40°C
40 A at 96 V 60%
Mains voltage
1 x 230 Volt
Mains frequency
50 - 60 Hz
Protection class
IP23 S
Dimensions in mm (L x W x H)
390 x 150 x 300
Weight in kg
15
Standards
EN60974-1 / EC60974-1
Maximum cutting capacity
16 mm
Quality cutting capacity
10 mm

O241 Scope of delivery:

DC TIG welder & plasma cutter O241
WIG torch: WP-26 (9 mandrel, 5 pole), 4m
TIG set, 14 pieces
plasma torch: AG-60 (9 mandrel, 5 pol.), quick gas closure, 6m
plasma set
electrode pliers 200A (9 mandrel), 3m
ground clamp with ground cable (9 mandrel), 3m
gas connection hose
water separator

Data sheet

Warranty conditions

Product catalogue

Technical Details O241

Bedienungsanleitung

VECTOR DIGITAL manual

PDF

PDF

related products