-
3in1 combination unit: DC TIG, MMA/STICK,Plasma cutting
-
DC TIG welding: welding of almost all metals
-
HF ignition (TIG)
-
Pulse function: in pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
-
MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are arc carriers and filler metal in one.
-
Hotstart: overcurrent is provided each time the welder is restarted, thus supporting the ignition of the arc.
-
Arc Force: molten material is more easily transferred to the workpiece, preventing the arc from being extinguished if this material causes contact between the electrode and the molten pool.
-
Anti-stick automatically shuts off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
-
Plasma cutter: CUT function by means of a plasma jet generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. This method can be used to cut all conductive metals (e.g. steel, stainless steel, aluminum, copper, etc.).
-
Contact ignition (CUT)
-
Cut thickness: maximum 12mm (hand guided),quality cut 8mm (hand guided)
-
advanced IGBT(InsulatedGate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
-
Overheating protection
-
9Memory locations for individual setting of welding parameters.
