AC/DC TIG Welder 200A & Plasma Cutter 40A, Pulse, Inverter, ALU, MMA, STICK, Electrode | O251
Item number: T1041VD

AC/DC TIG Welder 200A & Plasma Cutter 40A, Pulse, Inverter, ALU, MMA, STICK, Electrode | O251

Item number: T1041VD
Available now!

Shipping time: 2 - 3 workdays

1.802,39 €

including 16% VAT., no shipping costs to: DE,shipping (Standard)

Recommended retail price: 1.949,00 €
(You save 7.52%, that is 146,61 €)

VECTOR WELDING AC/DC TIG welding device with plasma cutter O251

AC/DC TIG 10-200A

PULS Function

HF ignition & Lift Arc

MMA/electrode 10-200A

Plasma cutter 40A

IGBT

10 memory locations

 
pcs.
Produktdetails anzeigen
WELDER + PLASMA CUTTER Combination O251

Item number: T1041VD

WELDER + PLASMA CUTTER O251

The O251 from Vector Welding is a professional combination unit for welding and plasma cutting

With its adjustable AC/DC (alternating current / direct current) mode, it can be used for all weldable metals, including aluminum. 

With 10-200A in TIG mode, 10-200A in MMA/electrode mode and plasma cutting with 10-40A the machine is well suited for installation, repair, maintenance and DIY.

O251 FEATURES & ADVANTAGES: 

  • 3 in1 combi device: AC/DC TIG, MMA/STICK, Plasma cutting   
  • AC/DC TIG welding: Processing of all weldable metals, including aluminum 
  • The adjustable AC output frequency allows the operator to focus the arc, minimizing the heat affected zone. 
  • Advanced AC balance control helps maintain a sharp tungsten needle to precisely control the arc in the weld joint.   
  • Pulse function: during pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece 
  • HF Ignition (TIG/CUT) 
  • Lift-Arc-Start: Allows AC or DC arcs to be started without high frequency.  
  • 2 T/4 T
  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one. 
  • Hot Start: each time the welding machine is restarted, overcurrent is provided to support the ignition of the arc.  
  • Arc-Force: melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and molten pool.    
  • Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.  
  • Plasma cutter: CUT function using a plasma beam generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. With this method all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.) 
  • Cutting thickness: maximum 16mm (hand-guided), quality cut 10mm (hand-guided) modern IGBT (Insulated Gate Bipolar Transistor) allows fast and therefore low-loss switching of electrical currents 
  • Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents 
  • Job memory: the O251 has 10 memory locations 


O251 FEATURES:

WIG
ACDC
AC Frequenz
AC Balance
HF Zündung
Lift Arc


2 Takt 4 Takt
Puls
Gasvorlauf
Startstrom
Stromanstieg
Stromabsenkung


Schlussstrom
Gasnachlauf
MMA
Hotstart
Arc Force
Anti Stick


Plasmaschneider
Cut Kontakt
IGBT
1 Phase
Fernsteuerbar
S Guard Gehäuse


Überhitzungsschutz
High Performance Kühlung
Digital Series



O251 TECHNICAL DETAILS:

Adjustment range welding current (TIG)
10 -200 A
Adjustment range welding current  (MMA/Elektrode)
10 -200 A
Setting range welding current (CUT mode)
10 - 40 A
Duty cycle (ED) TIG 40°C
200 A at 18 V 25%
Duty cycle (ED) MMA/STICK 40°C
200 A at 28 V 25%
Duty cycle (ED) Plasma cutter 40°C
40 A bei 96 V 60%
Input Voltage
1 x 230 Volt
Power frequency
50 - 60 Hz
Protection class
IP23 S
Dimensions in mm (L x W x H)
540 x 270 x 450
Weight (kg)
31
Standards
EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)
16 mm
Quality cutting capacity (hand guided)
10 mm

O251 SYSTEM CONTROL:

O251 Systemsteuerung
1. Display (Ampere)
8. Overheating indicator             
15. 2 T/4 T               
2. Display (V/%/S/Hz)
9.  JOB
16. Mode (MMA/WIG/CUT)
3. Volt
10. Save
17. "+" Button
4. Pulse width %
11. High frequency (HF) ignition On/Off
18. "-" Button
5. On/Off
12. AC/DC Modus
19. "Backward-" Button
6. Time (seconds)
13. Reset
20. "Forward-" Button
7. Pulse frequency (HZ)
14. PULS Function


O251 Einstellungsdetails
1. Gasflow
6. Pulse width  (%)
11. AC Frequency
2. Starting current
7. Pulse frequency (Hz)  
12. AC Balance      
3. Electricity increase 
8. Current reduction
13. Hot Start
4. Welding current (primary)
9. Closing current
14. Arc Force
5. Pulse current (secondary)
10. Gas after-run


O251 TECHNICAL DETAILS:

Adjustment range welding current (TIG)
10 -200 A
Adjustment range welding current  (MMA/Elektrode)
10 -200 A
Setting range welding current (CUT mode)
10 - 40 A
Duty cycle (ED) TIG 40°C
200 A at 18 V 25%
Duty cycle (ED) MMA/STICK 40°C
200 A at 28 V 25%
Duty cycle (ED) Plasma cutter 40°C
40 A bei 96 V 60%
Input Voltage
1 x 230 Volt
Power frequency
50 - 60 Hz
Protection class
IP23 S
Dimensions in mm (L x W x H)
540 x 270 x 450
Weight (kg)
31
Standards
EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)
16 mm
Quality cutting capacity (hand guided)
10 mm

O251 Lieferumfang:

AC/DC WIG Schweißgerät & Plasmaschneider O251
WIG-Brenner: WP-26 (13 Dorn, 5 pol), 4m
WIG-Set, 14-teilig
Plasma-Brenner: AG-60 (13 Dorn, 5 pol.), Gasschnellerschluss, 6m
Plasma-Set
Elektrodenzange 200A (13 Dorn), 3m
Massezange mit Massekabel (13 Dorn), 3m
Gasverbindungsschlauch
Wasserabscheider

Warranty conditions

VectorDigital product catalogue

Data sheet

Bedienungsanleitung

Bedienungsanleitung

Technical Details O251

Bedienungsanleitung

VECTOR DIGITAL manual

PDF

PDF

Welding parts

Others

TIG Accessories

Other customers have also bought the following items