AC/DC TIG Welder 200A & Plasma Cutter 40A, Pulse, Inverter, ALU, MMA, STICK, Electrode | O251
Número de artículo: T1041VD

AC/DC TIG Welder 200A & Plasma Cutter 40A, Pulse, Inverter, ALU, MMA, STICK, Electrode | O251

Número de artículo: T1041VD
disponible de inmediato

Tiempo de entrega: 2 - 3 Días laborables

1.899,00 €

incluido 19% IVA, Envío sin coste (Standard)

Precio de venta recomendado por el fabricante: 2.499,00 €
(Usted ahorra 24.01%, esto es 600,00 €)

VECTOR WELDING AC/DC TIG welding device with plasma cutter O251

AC/DC TIG 10-200A

PULS Function

HF ignition & Lift Arc

MMA/electrode 10-200A

Plasma cutter 40A

IGBT

10 memory locations

 
Mostrar detalles del producto
WELDER + PLASMA CUTTER Combination O251

Item number: T1041VD

WELDER + PLASMA CUTTER O251

 

The O251 from Vector Welding is a professional combination unit for welding and plasma cutting

With its adjustable AC/DC (alternating current / direct current) mode, it can be used for all weldable metals, including aluminum. 

With 10-200A in TIG mode, 10-200A in MMA/electrode mode and plasma cutting with 10-40A the machine is well suited for installation, repair, maintenance and DIY.

 

O251 FEATURES & ADVANTAGES: 

  • 3 in1 combi device: AC/DC TIG, MMA/STICK, Plasma cutting   
  • AC/DC TIG welding: Processing of all weldable metals, including aluminum 
  • The adjustable AC output frequency allows the operator to focus the arc, minimizing the heat affected zone. 
  • Advanced AC balance control helps maintain a sharp tungsten needle to precisely control the arc in the weld joint.   
  • Pulse function: during pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece 
  • HF Ignition (TIG) 
  • Lift-Arc-Start: Allows AC or DC arcs to be started without high frequency.  
  • 2 T/4 T
  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one. 
  • Hot Start: each time the welding machine is restarted, overcurrent is provided to support the ignition of the arc.  
  • Arc-Force: melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and molten pool.    
  • Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.  
  • Plasma cutter: CUT function using a plasma beam generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. With this method all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.) 
  • Cutting thickness: maximum 16mm (hand-guided), quality cut 10mm (hand-guided) modern IGBT (Insulated Gate Bipolar Transistor) allows fast and therefore low-loss switching of electrical currents 
  • Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents 
  • Job memory: the O251 has 10 memory locations 
 
 

O251 FEATURES:

Device functions

O251 TECHNICAL DETAILS:

Adjustment range welding current (TIG)10 -200 A
Adjustment range welding current  (MMA/Elektrode)10 -200 A
Setting range welding current (CUT mode)20 - 40 A
Duty cycle (ED) TIG 40°C200 A at 18 V 50%
Duty cycle (ED) MMA/STICK 40°C200 A at 28 V 50%
Duty cycle (ED) Plasma cutter 40°C40 A bei 96 V 60%
Input Voltage1 x 230 Volt
Power frequency50 - 60 Hz
Protection classIP23
Dimensions in mm (L x W x H)540 x 270 x 450
Weight (kg)31
StandardsEN 60974-1 / IEC 60974-1
Maximum cutting capacity (manually guided)16 mm
Quality cutting capacity (hand guided)10 mm

O251 SYSTEM CONTROL:

O251 Systemsteuerung
1. Display (Ampere)8. Overheating indicator             15. 2 T/4 T               
2. Display (V/%/S/Hz)9.  JOB16. Mode (MMA/WIG/CUT)
3. Volt10. Save17. "+" Button
4. Pulse width %11. High frequency (HF) ignition On/Off18. "-" Button
5. On/Off12. AC/DC Modus19. "Backward-" Button
6. Time (seconds)13. Reset20. "Forward-" Button
7. Pulse frequency (HZ)14. PULS Function 
O251 Einstellungsdetails
1. Gasflow6. Pulse width  (%)11. AC Frequency
2. Starting current7. Pulse frequency (Hz)  12. AC Balance      
3. Electricity increase 8. Current reduction13. Hot Start
4. Welding current (primary)9. Closing current14. Arc Force
5. Pulse current (secondary)10. Gas after-run 

O251 TECHNISCHE DETAILS:

Einstellbereich Schweißstrom (WIG  Modus)
10 -200 A
EInstellbereich Schweißstrom (MMA/STICK Modus)
10 -200 A
Einstellbereich Schweißstrom (CUT Modus)
10 - 40 A
Einschaltdauer (ED) WIG 40°C
200 A bei 18 V 25%
Einschaltdauer (ED) MMA/STICK 40°C
200 A bei 28 V 25%
Einschaltdauer (ED) Plasmaschneider 40°C
40 A bei 96 V 60%
Netzspannung
1 x 230 Volt
Netzfrequenz
50 - 60 Hz
Schutzart
IP23 S
Maße in mm (L x B x H)
540 x 270 x 450
Gewicht in kg
31
Normen
EN60974-1 / EC60974-1
Maximale-Schnittkapazität (Hand geführt)
16 mm
Qualitäts-Schnittkapazität (Hand geführt)
10 mm

O251 Lieferumfang:

AC/DC WIG Schweißgerät & Plasmaschneider O251
WIG-Brenner: WP-26 (13 Dorn, 5 pol), 4m
WIG-Set, 14-teilig
Plasma-Brenner: AG-60 (13 Dorn, 5 pol.), Gasschnellerschluss, 6m
Plasma-Set
Elektrodenzange 200A (13 Dorn), 3m
Massezange mit Massekabel (13 Dorn), 3m
Gasverbindungsschlauch
Wasserabscheider