AC/DC TIG welder 200A, pulse inverter, MMA, IGBT, HF ignition, aluminum | V241
Codice articolo: T1013VDVD

AC/DC TIG welder 200A, pulse inverter, MMA, IGBT, HF ignition, aluminum | V241

Codice articolo: T1013VDVD
scarsa disponibilità in magazzino

Tempo di consegna: 2 - 3 giorni lavorativi

1.749,00 €

compr. 19% IVA, Consegna senza spese di spedizione Entro DE,Spedizione (Standard)

UVP dal produttore: 2.299,00 €
(Lei risparmia 23.92%, ovvero 550,00 €)

VECTOR WELDING AC/DC TIG welding machine V241

AC/DC TIG 10-200A

PULS Function


MMA/Electrode 10-200A

IGBT (Infineon)

10 memory locations

AC/DC TIG welding machine V241

Item number: T1013VD

AC/DC TIG welding machine V241

AC /DC V241 offers a precise, professional AC/DC TIG welding process. It is a precise welding specialist that fits all welding materials (including aluminum)

Simple operation and full functions: All necessary controls for AC and DC TIG welding (AC/DC) with HF or contact ignition (Lift Arc) can be quickly set via the control panel. TIG welding with 200A and MMA/electrode welding also with 200A.

The V241 welding unit has 10 memory channels, set welding parameters can be stored and used again for a new workpiece.


  • AC/DC TIG: welding of all weldable metals including aluminium
  • The adjustable AC output frequency allows the operator to focus the arc to minimize the heat affected zone. 
  • The advanced AC balance control helps to maintain a sharp tungsten needle to precisely control the arc in the weld joint. 
  • Lift-Arc-Start: Enables AC or DC arc starting without high frequency.
  • Pulse function: during pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
  • Continuous output control: Focus the arc for different material thicknesses. Strong for heavy duty: 200A at 50% (TIG & MMA).
  •  Trigger Control: 4T/2T
  • MMA/electrodes/stick: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one. 
  • Hotstart:  every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc. 
  • Arc-Force: Melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between electrode and molten pool.  
  • Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp 
  • 10 memory locations for individual setting of the welding parameters.



Welding Current/Voltage Range
10-200 A
Duty cycle TIG
200 A at 18V 50%
Duty cycle MMA
200 A at 28V 50%
Input Voltage
1 x 230 Volt
Power frequency
50 - 60 Hz
Protection class
Dimensions in mm (L x W x H)
252 x 260 x 445 mm
Weight (kg)
EN 60974-1 / IEC 60974-1
Fan cooled
Welder type
Inverter power source
V241 Schweißgerät Systemsteuerung

1. RESET button
7. Power on/off
13. "Back" - Button
2. PULS Function
8. Overheating indicator
14. "Forward" Button
3. Trigger Control: 4T/2T
9. JOB and SAVE
15. "+" Button
4. Schweißmodus (MMA/WIG)
10. Setting of welding parameters
16. "-"  Button
5. Display (amps)
11. High frequency (HF) Button

6. Display (Volt)
12. AC / DC Mode Button


V241 Schweißgerät Schweißparameter Einstellungen

1. Gas flow (0,1-20s)
6. Impulse width (10-90%)
11. AC frequency (50-200HZ)
2. Start power (10-200A)
7. Impulse frequency (1-200HZ)
12.Electricity shifting (10-50%)
3. Electricity increase (0,1-10s)
8. Electricity reduction (0,1-10s)
13. Hotstart
4. Welding current/Power range    10-200A: DC TIG mode/AC HF TIG mode/STICK mode
9. End power (10-100A)
14. Arcforce
5. Pulse current/Pulse range    10-200A: DC TIG mode/AC HF TIG mode
10. Gas after-run (1-20s)


Einstellbereich Schweißstrom
10-200 A
Einschaltdauer (ED) WIG 20°C
200 A bei 18V 50%
Einschaltdauer (ED) MMA 20°C
200 A bei 28V 50%
1 x 230 Volt
50 - 60 Hz
Maße in mm (L x B x H)
252 x 260 x 445 mm
Gewicht in kg
EN 60974-1 / IEC 60974-1
Lüfter gekühlt

V241 Lieferumfang:

AC/DC WIG Schweißgerät V241
WIG-Brenner: WP-26 (13 Dorn), 4m, Gasschnellverschluss
WIG- Set, 14-teilig
Elektrodenzange 200A (13 Dorn), 3m
Massezange mit Massekabel 200A (13 Dorn), 3m




I clienti hanno acquistato anche i seguenti prodotti