AC/DC TIG Welder & Plasma Cutter 200A, Pluse, MMA, E-Hand, Inverter | NewYork 2500
Item number: K1055VW

AC/DC TIG Welder & Plasma Cutter 200A, Pluse, MMA, E-Hand, Inverter | NewYork 2500

Item number: K1055VW
Available now!

Shipping time: 2 - 3 workdays

681,38 €

including 16% VAT., no shipping costs to: DE,shipping (Standard)

Recommended retail price: 799,00 €
(You save 14.72%, that is 117,62 €)

VECTOR WELDING welder & Plasma cutter New York 2500

AC/DC TIG 10-200A

PULSE Funktion

HF-ignition

MMA/Electrode 10-170A

Plasma Cutter 50A

IGBT

Job storage

Note: Coupling valve not included in delivery

Produktdetails anzeigen
Schweißgerät und Plasmaschneider new york 2500

Item number: K1055VW

AC/DC TIG WELDER + PLASMA CUTTER New York 2500

The NEW YORK 2500 from Vector Welding is a combination unit for welding and plasma cutting. 

Due to the adjustable AC/DC (alternating current / direct current) mode, it can be used for all weldable metals, including aluminium. With 10-200A in TIG mode, 10-170A in MMA/electrode mode and plasma cutting with 10-50A the unit is well suited for installation, repair, maintenance and DIY. 

The NEW YORK 2500 offers everything you need for metal welding or cutting. 

NEW YORK FEATURES & ADVANTAGES: 

  • 3 in1 combi device: AC/DC TIG, MMA/STICK, Plasma cutting   
  • AC/DC TIG welding: Processing of all weldable metals, including aluminum 
  • The adjustable AC output frequency allows the operator to focus the arc, minimizing the heat affected zone. 
  • Advanced AC balance control helps maintain a sharp tungsten needle to precisely control the arc in the weld joint.   
  • Pulse function: during pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece 
  • HF Ignition (TIG/CUT) 
  • 2 T/4 T
  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one. 
  • Hot Start: each time the welding machine is restarted, overcurrent is provided to support the ignition of the arc.  
  • Arc-Force: melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and molten pool.    
  • Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.  
  • Plasma cutter: CUT function using a plasma beam generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. With this method all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.) 
  • Cutting thickness: maximum 16mm (hand-guided), quality cut 10mm (hand-guided) modern IGBT (Insulated Gate Bipolar Transistor) allows fast and therefore low-loss switching of electrical currents 
  • Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents 
  • Job memory: the O251 has 10 memory locations 


NEW YORK 2500 FEATURES:

WIG
ACDC
AC Frequenz
AC Balance
HF Zündung
2 Takt 4 Takt


Puls
Gasvorlauf
Startstrom
Stromanstieg
Stromabsenkung
Schlussstrom


Gasnachlauf
MMA
Hotstart
Arc Force
Anti Stick
Plasmaschneider


Cut Kontakt
IGBT
1 Phase
Fernsteuerbar
S Guard Gehäuse
Überhitzungsschutz


High Performance Kühlung
Digital Series
Smart Kühlung




NEW YORK 2500 TECHNICAL DETAILS:

Adjustment range welding current (TIG)
10 -200 A
Adjustment range welding current  (MMA/Elektrode)
10 -170 A
Setting range welding current (CUT mode)
20 - 50 A
Duty cycle (ED) TIG 40°C
200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C
170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C
50 A at 100 V 40%
Input Voltage
1 x 230 Volt
Power frequency
50 - 60 Hz
Protection class
IP23
Dimensions in mm (L x W x H)
380 x 160 x 360
Weight (kg)
11,5
Standards
EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)
13 mm
Quality cutting capacity (hand guided)
8 mm

NEW YORK 2500 SYSTEM CONTROL:

New York 2500 Systemsteuerung
1. Display
5. On/Off                      
9. Selection key             
2. PULSE function
6.  Overheating indicator      
10. Hotstart/Arc Force/Anti Stick
3. 2 T/4 T
7. JOB and SAVE
11. Parameter settings
4. Mode (MMA/TIG/CUT)
8. AC/DC Mode


New York 2500 Einstellungsdetails
1. Gasvorlauf
5. Sekundärstrom
9. Final Current
2. Starting current
6. Impulsweite (%)
10. Gas after-run          
3. Current rise                                   
7. Impulsfrequenz (Hz)                   
11. AC Frequency                      
4. Welding current (primary)
8. Current reduction
12. AC Balance

NEW YORK 2500 TECHNICAL DETAILS:

Adjustment range welding current (TIG)
10 -200 A
Adjustment range welding current  (MMA/Elektrode)
10 -170 A
Setting range welding current (CUT mode)
20 - 50 A
Duty cycle (ED) TIG 40°C
200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C
170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C
50 A at 100 V 40%
Input Voltage
1 x 230 Volt
Power frequency
50 - 60 Hz
Protection class
IP23
Dimensions in mm (L x W x H)
380 x 160 x 360
Weight (kg)
11,5
Standards
EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)
13 mm
Quality cutting capacity (hand guided)
8 mm

New York 2500 Scope of delivery:

AC/DC TIG Welder with Plasma cutter New York 2500
TIG torch: WP-17 (9 mandrel, 5 pole), 4m
TIG- Set, 14 pieces
Plasma torch: AG-60 (9 mandrel, 5 pole), 4m
Electrode pliers (9 mandrel), 3m
Ground clamp with ground cable (9 mandrel), 3m
Water separator
Gas connection hose

NewYork 2500 Manual

English Manual NewYork 2500

SIWM Katalog

Other customers have also bought the following items