AC/DC WIG PLASMA 200 D + Plasmaschneider

AC/DC TIG Welder 200A & Plasma Cutter 50A, MMA Electrode 170A, HF-Ignition, Alu | 200D

Codice articolo: K2001B

Item number: K2001B

WELDER + PLASMA CUTTER 200D

The AC/DC TIG PLASMA 200D from Vector Welding is a combination unit for welding and plasma cutting. With 10-200A in TIG mode, 10-170A in MMA/electrode mode and plasma cutting with 10-50A the unit is well suited for installation, repair, maintenance and DIY.The lightweight 200D offers everything you need for metal welding or cutting. It processes all weldable metals, including aluminum.

200 D FEATURES & ADVANTAGES:

3 in1 combi device: AC/DC TIG, MMA/STICK, Plasma cutting
AC/DC TIG welding: Processing of all weldable metals, including aluminum
HF Ignition (TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hot Start: each time the welding machine is restarted, overcurrent is provided to support the ignition of the arc.
Arc-Force: melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and molten pool.
Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
Plasma cutter: CUT function using a plasma beam generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. With this method all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.)
Cutting thickness: maximum 16mm (hand-guided), quality cut 10mm (hand-guided) modern IGBT (Insulated Gate Bipolar Transistor) allows fast and therefore low-loss switching of electrical currents
Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents

200 D FEATURES:

200 D TECHNISCHE DETAILS:

Adjustment range welding current (TIG)	10-200 A
Adjustment range welding current (MMA/Elektrode)	10 -170 A
Setting range welding current (CUT mode)	10 - 50 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C	50 A at 100 V 40%
Input Voltage	1 x 230 Volt
Power frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight (kg)	9,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)	12 mm
Quality cutting capacity (hand guided)	8 mm

1. Display	6. Amperage (A)	11. 2 T/ 4 T
2. Hotstart/Arc Force	7. %-Choice	12. Mode (MMA/WIG/CUT)
3. AC/DC Mode	8. Frequency (Hz)	13. Parameter settings
4. Adjustment control	9. On/Off
5. Time (seconds)	10. Overheating indicator

1. Gasflow	5.REM=Remote/remote control light	9. AC Frequency
2. Starting current	6. Current reduction	10. AC Balance
3.Current increase	7. Final Current
4. Welding current	8. Gas after-run

200 D TECHNISCHE DETAILS:

Einstellbereich Schweißstrom (WIG Modus)	10-200 A
EInstellbereich Schweißstrom (MMA/STICK Modus)	10 -170 A
Einstellbereich Schweißstrom (CUT Modus)	10 - 50 A
Einschaltdauer (ED) WIG 40°C	200 A bei 18 V 40%
Einschaltdauer (ED) MMA/STICK 40°C	170 A bei 26.8 V 25%
Einschaltdauer (ED) Plasmaschneider 40°C	50 A bei 100 V 40%
Netzspannung	1 x 230 Volt
Netzfrequenz	50 - 60 Hz
Schutzart	IP23S
Maße in mm (L x B x H)	425 x 152 x 291
Gewicht in kg	9,5
Normen	EN60974-1 / EC60974-1
Maximale-Schnittkapazität (Hand geführt)	12 mm
Qualitäts-Schnittkapazität (Hand geführt)	8 mm